BMW ICOM NEXT | BMW NBT EVO FSC Codes | BMW NBT & CIC FSC Codes | BMW Rheingold , ISTA/P, KSD, ETK remote installation | BMW STANDARD TOOLS remote installation | BMW ESYS remote installation
Go Back   BMW forum. Diagnostics, coding, programming, repair BMW vehicles. > BMWelcome > BMW coding and programming

Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 01-26-2019, 02:55 AM
Junior Member
 
Join Date: Apr 2015
Location: southwest louisiana
Car: 1994 e34 540i, 07' e70 X5 4.8i
Posts: 3
Thanks: 0
Thanked 0 Times in 0 Posts
Default 2003 e46 manual swap coding issue

hello, Ive performed a manual swap on my 2003 325i, did all the required wiring additions to the dme and ews for the clutch switches.
Im fairly familiar with NCSexpert on some things Ive done with it so far, but Im having a issue getting the EWS coded to a manual.
I used the expert mode and Revtors expert profile
Ive managed to code the AKMB and the ALSZ for manual without any issues
When I try to code the AEWS for manual, in the job codes I dont have the FA_WRITE option in the list, Ive tried SG_Codierian to code it and get the same error, also in the job list is two ZCS jobs, but I havent tried that because I have a facelift car.
Ive tried to process the whole car and get the same faulty coding error when it gets to the AEWS.
Ive checked the coding of the ews in INPA after attempting and it still indicates the car is still a auto, and its keeping the car from starting.
Any help will be appreciated, theres something Im probably over looking or not selecting the right job, thanks

Sent from my SM-G892A using Tapatalk


Reply With Quote
  #2  
Old 01-27-2019, 02:39 AM
Junior Member
 
Join Date: Apr 2015
Location: southwest louisiana
Car: 1994 e34 540i, 07' e70 X5 4.8i
Posts: 3
Thanks: 0
Thanked 0 Times in 0 Posts
Default

I figured out my issue, my key went bad, it quit communicating with the ews, all my coding was correct.

Getting it taken care of this week

Sent from my SM-G892A using Tapatalk
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
"No communication" with modules: Coding issue on SMG to manual or hardware issue? sayyoudidnt BMW diagnostics and repair 0 08-05-2018 08:46 PM
New to Coding/ Manual Swap Coding help need. W0LF BMW coding and programming 0 11-14-2017 02:18 PM
Early E46 Auto manual Swap NCS Expert darrboate36 BMW coding and programming 6 11-10-2015 02:44 AM
E39 auto to manual swap coding info needed shaunmlavery BMW coding and programming 7 07-28-2014 02:41 AM
BMW e46 Auto to Manual Transmission Swap mikerob97 BMW diagnostics and repair 6 04-02-2012 03:04 AM


All times are GMT. The time now is 08:22 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.1
BMW forum: diagnostics, coding, programming.