BMW ICOM NEXT | BMW NBT EVO FSC Codes | BMW NBT & CIC FSC Codes | BMW Rheingold , ISTA/P, KSD, ETK remote installation | BMW STANDARD TOOLS remote installation | BMW ESYS remote installation
Go Back   BMW forum. Diagnostics, coding, programming, repair BMW vehicles. > BMWelcome > BMW coding and programming

Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 11-24-2012, 07:04 PM
Junior Member
 
Join Date: Nov 2012
Location: paris
Car: 335D E92 Sport Design
Posts: 9
Thanks: 1
Thanked 0 Times in 0 Posts
Default Burned module

Hi everybody,
i bought a crash car and i have to change modules.
I find used on ebay but is it possible to change vin number on this module?


Reply With Quote
  #2  
Old 11-25-2012, 01:21 PM
Junior Member
 
Join Date: Nov 2012
Location: paris
Car: 335D E92 Sport Design
Posts: 9
Thanks: 1
Thanked 0 Times in 0 Posts
Default

excuse me but i don't understand
Reply With Quote
  #3  
Old 11-25-2012, 04:45 PM
Junior Member
 
Join Date: Nov 2012
Location: macedonia
Car: bmw
Posts: 16
Thanks: 0
Thanked 5 Times in 2 Posts
Default change

off course this is possible but You must have INPA program + tools for that.
If You have this equipment pleese folow this:
1. conect adapter cable to OBD2
2. With INPA read UIF informacion use buton F2 for find the ZUB number of control unit on which You wont change VIN ( remember this 7 digits number )
2. caal VIN KFP program
3. enter 7 digits number in ZUB NUMBER
4. confirm next page
5. on the 3 page from start You while see buton on the right down side on screen VIN - press this buton
6.enter new VIN last 7 position
7.on same screen after step 6 press buton DONE
8.press buton PROGRAMING
9 wnen the Programing is finis exit from this program and call new program for cooding NSC expert tool and code this control unit

Warning : Dont switch in off position terminal 15 and terminal 30 , when You finis with coding then exchange terminals ( full contact )
Power in all time must be minimum 13V
Regards
Reply With Quote
  #4  
Old 11-25-2012, 07:02 PM
Junior Member
 
Join Date: Nov 2012
Location: paris
Car: 335D E92 Sport Design
Posts: 9
Thanks: 1
Thanked 0 Times in 0 Posts
Default

thanks for your reponse. i downloaded the inpa program on this site. I also have the obd inpa cable. is it enough?
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
How to Code new/used ABS module with NCP Expert -M54- BMW GT1, OPS/OPPS, INPA 16 11-17-2017 05:30 AM
DIY: How to Code new/used ABS module -M54- DIY guides 5 11-04-2015 07:38 PM
Availability of DSC Module in NCS Expert JimmyW BMW GT1, OPS/OPPS, INPA 2 08-29-2014 04:34 PM
The display module for wiring diagram (svg plug-in ) cannot be initialized garagetech BMW ISIS, ICOM A+B+C, Esys 3 08-03-2013 09:39 PM
Bmw 120d e87 - n47 - air bag mrs module - programming Scooter BMW GT1, OPS/OPPS, INPA 0 04-26-2011 12:55 PM


All times are GMT. The time now is 05:11 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.1
BMW forum: diagnostics, coding, programming.