BMW ICOM NEXT | BMW NBT EVO FSC Codes | BMW NBT & CIC FSC Codes | BMW Rheingold , ISTA/P, KSD, ETK remote installation | BMW STANDARD TOOLS remote installation | BMW ESYS remote installation
Go Back   BMW forum. Diagnostics, coding, programming, repair BMW vehicles. > BMWelcome > BMW coding and programming

LinkBack Thread Tools Display Modes
Old 09-27-2016, 11:52 PM
Junior Member
Join Date: Sep 2016
Location: Denver, CO
Car: 2005 330i ZHP
Posts: 1
Thanks: 0
Thanked 0 Times in 0 Posts
Default Cable Suggestion for E46 to use INPA and NavCoder

I have a cable (link below) that purchased from One Stop that support K Line and D Can but INPA and NavCoder are both having problems with it. INPA and NavCoder will recognize the cable and also show connection in INPA (Battery/Ignition highlighted on main INPA screen). When I go to scan a module, it cannot connect to it. I am able to use PA-Soft/BMW Scanner with no issues. Is it possible that I have a bad cable? Is their a cable that someone might recommend? I am trying to use this with a 2005 330i E46, if it matters.

[Only for registered users... ]

Last edited by mercury26; 09-28-2016 at 12:01 AM.

Reply With Quote

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
Serial Port Cable for interface EASYDIS INPA/EDIABAS steinec BMW coding and programming 2 10-22-2017 09:47 AM
Hi INPA K+Dcan cable faulty?? need suggestion CASCAM330 BMW coding and programming 5 11-20-2015 08:03 AM
INPA 3.01 - Where to get / Problems with USB cable jonwrong BMW diagnostics and repair 2 11-20-2015 08:00 AM
K+DCAN Atmega162 Drivers or Cable Suggestion E65 vampofvegas BMW coding and programming 2 05-28-2015 10:07 AM
How to connect DDE direct on INPA cable without car? Napalm BMW diagnostics and repair 1 08-12-2012 08:02 PM

All times are GMT. The time now is 11:16 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.1
BMW forum: diagnostics, coding, programming.