BMW ICOM NEXT | BMW NBT EVO FSC Codes | BMW NBT & CIC FSC Codes | BMW Rheingold , ISTA/P, KSD, ETK remote installation | BMW STANDARD TOOLS remote installation | BMW ESYS remote installation
Go Back   BMW forum. Diagnostics, coding, programming, repair BMW vehicles. > BMWelcome > BMW coding and programming

Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 08-09-2014, 05:57 AM
Junior Member
 
Join Date: Nov 2011
Location: Malaysia
Car: E49
Posts: 6
Thanks: 0
Thanked 1 Time in 1 Post
Default E60 Question about winkfp LM 2 module programing

ok
the scenario is like this
I try do a programming on LM 2 module
so I use inpa f2 to get the HW number
then I find out it is LM260 ECu family

I launch winkfp
select the f2 select ZB
there is 5 ZB numbers for me to select..
my car LM HW number pointed at the third ZB numbers
I try selecting the last ZB numbers and go programming but it say incorrect ZUSB something like that
if I choose back the same ZB number which I get from inpa then I can do the programming no problem

so my question is, does the lowest ZB number point to the latest software version?
By choosing the same ZB number and program again, it means I just reprogram with the same software version again?
Is it possible to select other ZB number to go programming?
OR the whole LM260 is actually same software n same version?
I notice newer LM2 module is using LM460


Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Programing power supply osa13 BMW coding and programming 1 08-13-2016 08:53 AM
[ e91 ] problem coding MOSTGW module winkfp korbe14 BMW coding and programming 1 05-03-2014 12:11 PM
Question regarding the use of DIS and winkfp Gwegz320 BMW GT1, OPS/OPPS, INPA 1 03-02-2014 09:55 AM
M3 EDC Module Flash Using WinKFP possible? terahertz BMW GT1, OPS/OPPS, INPA 1 02-18-2014 01:27 PM
DSC programing honczek BMW GT1, OPS/OPPS, INPA 0 07-15-2012 09:28 AM


All times are GMT. The time now is 11:17 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.1
BMW forum: diagnostics, coding, programming.