BMW ICOM NEXT | BMW NBT EVO FSC Codes | BMW NBT & CIC FSC Codes | BMW Rheingold , ISTA/P, KSD, ETK remote installation | BMW STANDARD TOOLS remote installation | BMW ESYS remote installation
Go Back   BMW forum. Diagnostics, coding, programming, repair BMW vehicles. > BMWelcome > BMW coding and programming

Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 08-23-2014, 01:30 AM
Junior Member
 
Join Date: Aug 2013
Location: MI
Car: 2011 335i xdrive M-sport
Posts: 2
Thanks: 0
Thanked 0 Times in 0 Posts
Default E90 Alpina TCU Flash: Paddle Shifter fix (not working)

Hi all,

I successfully flashed my TCU with the Alpina B3 flash. I have a 2011 335xi MSport with Nav. As you may know, doing this flash on 2008+ cars can lead to inoperable paddle shifters. By reflashing/coding the EGS module with the stock .trc file, this supposedly fixes the problem. I attempted the following fix:
[Only for registered users... ]
0-Start ignition with cluster lights on
1-Load NCSexpert
2-File Use EXPERTMODE profile and click ok
3-(F1) Vin/ZCS/FA
4-(F3) SG ausw
5-Choose E89 chassis click ok
6-Choose CAS click ok
7-(F6) Back
8-Choose ECU and pick EGS
9-Press F3 (execute JOB)
10-After it says coding ended your done!
11-Close out NCSexpert



However, while attempting the paddle shifter fix, I get the following error, after executing job:








I have tried SP-DATEN 48.1, 49, 50.2, 53.3 (updating with BMW Coding Tool); however, I end up with the same result. I also used a .MAN profile (revtor's, ncsdummy, etc.), and tried to write the .MAN file; however this did not work. I even tried writing the NETTODAT.MAN file. This also didn't work.

I think I have gotten this same error when trying to code .man files with typos before...but I'm not modifying anything in the .trc files...I don't understand why I would be getting an error writing/flashing/coding a vanilla/untouched .trc file that was read from the EGS module Anybody know what could be causing this?


Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
CAS not working anymore E60 izzi41 BMW GT1, OPS/OPPS, INPA 6 06-24-2014 11:12 PM
Alpina D3 software N47 Bulu BMW coding and programming 0 03-27-2014 09:28 PM
Aux input not working Hibbster10 BMW coding and programming 0 03-15-2014 07:30 AM
Aux input not working Hibbster10 3-er 0 03-15-2014 07:28 AM
DIS working, INPA not working satveersangha BMW diagnostics and repair 2 04-11-2013 11:27 AM


All times are GMT. The time now is 02:42 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2018, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.1
BMW forum: diagnostics, coding, programming.