BMW ICOM NEXT | BMW NBT EVO FSC Codes | BMW NBT & CIC FSC Codes | BMW Rheingold , ISTA/P, KSD, ETK remote installation | BMW STANDARD TOOLS remote installation | BMW ESYS remote installation
Go Back   BMW forum. Diagnostics, coding, programming, repair BMW vehicles. > BMWelcome > BMW coding and programming

Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 04-23-2013, 02:18 PM
Junior Member
 
Join Date: May 2012
Location: UK
Car: E91 320d
Posts: 1
Thanks: 1
Thanked 0 Times in 0 Posts
Default Error coding RLS but not FRM, CAS & SPEG

In a 2008 R56 I am having an issue writing to the RLS module with NCSExpert.

I have coded the FRM, CAS and SPEG modules without any issue with my setup. I can read the RLS and all looks normal until I write it when I get the following:

ERROR! Modul: CBD_PROC.C, ProcNr: 02, LineNr: 10, ErrorNr: 40.
003003'01,FLC_SCHWELLWERT_SATZ_1 (1207d, 4B7h)

ERROR! Modul: CDH.C, Proc: CDHGetNettoDataFromCbd, LineNr: 01, ErrorNr: 1043
COAPI-1043: error during processing CBD-file
RLS_PL3.C06

>> ERROR! Modul: COAPI2.CPP, Proc: coapiRunCabd, LineNr: 06, ErrorNr: 1043
SG_CODIEREN


I have been using the e90 Daten v41 files from the file NCSExpert_COMPLETE_v41_daten_EDIABAS_7.zip. I initially though I may need a new Datens, so I updated to v45 (just for the R56) usin the update facility withing BMW Coding Tool v2.50.
here is the MAN file I was using:
KONFIG_RLS_REGEN
nicht_aktiv
TYP_RLS_OPTIK
aktiv
KONFIG_NACHL_REGEN
wert_01
KONFIG_RLS_GESCHW
nicht_aktiv - changed from activ
EMPF_OHNE_RAENDELRAD
empfindlichkeitsstufe_3
WISCHEN_STUFE2
aktiv
WISCHERMOTOR_RSK
nicht_aktiv
DEF_FLC_SCHWELLWERT_SATZ
wert_02 - changed from wert-01
FLC_SCHWELLWERT_SATZ_1
wert_02 - changed from wert-01
V_HIGH_SPEED_WISCHEN
wert_01
FLC_SCHWELLWERT_SATZ_2
wert_02
FLC_SCHWELLWERT_SATZ_3
wert_03
TYP_FRONTSCHEIBE
serienscheibe
KONFIG_RLS_RAENDELRAD
nicht_aktiv
FLC_SCHWELLWERT_SATZ
wert_01

Anyone know what this issue might be?

PS Using INPA 7.2.0. NCSExpert 3.1.0 & INPA 5.0.2 with v45 datens, WinXP SP3


Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
NCS Error iph-0006 EDIABAS or SGBD Error thisizaremix BMW GT1, OPS/OPPS, INPA 5 06-09-2014 07:26 PM
R55: FRM, SPEG, ABG Read Error calforhelp BMW coding and programming 1 03-31-2013 03:02 AM
Job Status Error [Error ECU Rejected] instead of [Okay] when trying to clear SRS ligh cboy BMW GT1, OPS/OPPS, INPA 2 04-21-2012 08:43 PM
INPA Reading/ Coding E38 1995 with ODB1 20 pins, get error ingar@spn.no BMW diagnostics and repair 1 12-07-2011 04:35 PM
Error with INPA Reading/ Coding E38 1995 ODB1 20 pin ingar@spn.no BMW GT1, OPS/OPPS, INPA 0 12-01-2011 09:44 AM


All times are GMT. The time now is 10:52 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.1
BMW forum: diagnostics, coding, programming.