BMW ICOM NEXT | BMW NBT EVO FSC Codes | BMW NBT & CIC FSC Codes | BMW Rheingold , ISTA/P, KSD, ETK remote installation | BMW STANDARD TOOLS remote installation | BMW ESYS remote installation
Go Back   BMW forum. Diagnostics, coding, programming, repair BMW vehicles. > BMWelcome > BMW coding and programming

Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 10-30-2012, 08:33 PM
Junior Member
 
Join Date: Sep 2012
Location: Florida
Car: F10, F25
Posts: 1
Thanks: 0
Thanked 0 Times in 0 Posts
Default F25 LED Bulb Error Fix.

Problem, I have not been able to find much about replacing the OEM incandescent turn and brake bulbs with LEDís. Like many I was disappointed that my new X3 did not come with LEDís for the turn signals and brake lights (My two year older F10 does have them) so I started pulling together as much info from all the forums I could find and then started filling in the holes. I have read good and bad about Error Free LED Bulbs and did not wish to cut any wires to add load resistors, so I looked into coding as an alternative (I just started coding on both my FXX vehicles with great success).

Result, I am 99% sure I have figured out the codes which check for front & rear turn signals, brake lights, fog lights and reverse light errors on my F25. I tried it this afternoon by removing a bulb then coding that particular bulb to ďnot activeĒ and it worked, the BC warning and fast flash rate both went away immediately. Now I am going to order regular LED bulbs and see if there are any problems. If this works I will post the codes for others to use.


Reply With Quote
  #2  
Old 11-28-2012, 08:40 AM
Junior Member
 
Join Date: Nov 2012
Location: New York
Car: 2007 X3 3.0si
Posts: 1
Thanks: 0
Thanked 0 Times in 0 Posts
Default

Did you have any luck with this? I have a similar project going on with my E83 X3. I'm getting the bulb out warning signal on the dash.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
NCS Error iph-0006 EDIABAS or SGBD Error thisizaremix BMW GT1, OPS/OPPS, INPA 5 06-09-2014 07:26 PM
Job Status Error [Error ECU Rejected] instead of [Okay] when trying to clear SRS ligh cboy BMW GT1, OPS/OPPS, INPA 2 04-21-2012 08:43 PM
BMW E39 E63 E83 Angel Eye Bulb Replacement Admin 5-er 0 01-13-2012 08:11 PM
BMW E46 BMW E46 M3 / 330 ZHP - Fog Light Bulb Replacement Admin 3-er 0 01-13-2012 07:57 PM


All times are GMT. The time now is 05:11 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.1
BMW forum: diagnostics, coding, programming.