BMW ICOM NEXT | BMW NBT EVO FSC Codes | BMW NBT & CIC FSC Codes | BMW Rheingold , ISTA/P, KSD, ETK remote installation | BMW STANDARD TOOLS remote installation | BMW ESYS remote installation
Go Back   BMW forum. Diagnostics, coding, programming, repair BMW vehicles. > BMWelcome > BMW coding and programming

Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 12-19-2011, 08:52 PM
nek nek is offline
Junior Member
 
Join Date: Oct 2011
Location: crete
Car: e70
Posts: 1
Thanks: 0
Thanked 0 Times in 0 Posts
Default FA_READ ERROR - NCS Expert

I'm getting the following error when I'm trying to read ZCS/FA from ECU (both CAS & FRM) of my car (2008 e70) with NCS Expert:

FA_READ ERROR
COAPI-2000: EDIABAS or SGBD error
BIP-0001: To long job parameter or string register access

I'm using EDIABAS v7.2.0, NCS Expert v3.1.0, INPA v5.0.2 The error occurs with all Daten versions I've tested (v39, v43, v44).

The EDIABAS error definition for this error is:

BIP-0001: OUT OF RANGE
EDIABAS_BIP_0001
Meaning: Job parameter too long or illegal index when accessing string registers.
Causes: This error usually always occurs whenever access is made to an array variable with a calculated index and this is too large.
Example:
i=100;
array[100*i]=50;
Error correction:
Check all array accesses in your job if they contain an index which is possibly invalid. The indexes must not exceed 1024/element size.

Not too enlightening....

Any ideas?

Thanx!


Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
ncs-expert tool not in english sparti BMW GT1, OPS/OPPS, INPA 12 01-26-2017 01:54 PM
NCS Error iph-0006 EDIABAS or SGBD Error thisizaremix BMW GT1, OPS/OPPS, INPA 5 06-09-2014 07:26 PM
E60 Aux Input NCS Expert. motorworks BMW GT1, OPS/OPPS, INPA 4 10-16-2012 05:48 PM
Job Status Error [Error ECU Rejected] instead of [Okay] when trying to clear SRS ligh cboy BMW GT1, OPS/OPPS, INPA 2 04-21-2012 08:43 PM
Guide for use bmw expert tools davidemx BMW GT1, OPS/OPPS, INPA 6 07-18-2011 05:51 AM


All times are GMT. The time now is 02:28 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.1
BMW forum: diagnostics, coding, programming.