BMW ICOM NEXT | BMW NBT EVO FSC Codes | BMW NBT & CIC FSC Codes | BMW Rheingold , ISTA/P, KSD, ETK remote installation | BMW STANDARD TOOLS remote installation | BMW ESYS remote installation
Go Back   BMW forum. Diagnostics, coding, programming, repair BMW vehicles. > BMWelcome > BMW coding and programming

Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 07-12-2013, 06:58 PM
Junior Member
 
Join Date: Jun 2013
Location: USA
Car: E39 M5
Posts: 3
Thanks: 1
Thanked 0 Times in 0 Posts
Default Finding ECU Address to use with NFS Emergency Flash

I have an 2002 330i that I am mating a new (to the car) ECU. During the WinKFP flash communications was lost and now the ECU is bricked. I have done some reading that NFS Emergency Flash can possibly get it unbricked, but to do so I need to provide the ECU Address.

The correct ZB# for my car is 7571613 so I tried pulling it up in WinKFP again to see if it would tell me the ECU address, but it only says, "XX - P-SGBD uses internal Address" in the ECU address/integration position field

Next I ran the ECU Identify job in ToolSet32 and got the results in the attachment. Is the ID_COD_INDEX of 00 the address to use for my ECU, or is it possible that it got corrupted as well from the bad flash. I do know that the HW # is 7572342 from before I started the initial flash.

Any help on this matter is greatly appreciated.
Attached Images
File Type: jpg IMG_0999.JPG (596.5 KB, 29 views)


Reply With Quote
  #2  
Old 07-12-2013, 09:27 PM
Junior Member
 
Join Date: Jun 2011
Location: poland
Car: acura
Posts: 14
Thanks: 3
Thanked 29 Times in 3 Posts
Default

ME 19 12 01 MDS43 11MDS43.IPO 11MDS43.PRG SIFLD2 MDS43.HIS MDS43.DAT O MDS43D.DIR MDS43.HWH

ecu adress for MDS43 is 12
Reply With Quote
The Following User Says Thank You to slaw1971 For This Useful Post:
trentmw (07-12-2013)
  #3  
Old 07-13-2013, 03:20 AM
Junior Member
 
Join Date: Jun 2013
Location: USA
Car: E39 M5
Posts: 3
Thanks: 1
Thanked 0 Times in 0 Posts
Default

Ok I tried Emergency Flash and did not work. I have attached some pics of the errors. Don't know if this unit is toast or not. I acquired one more MS43 but hesitant to try and flash to my car with the recent failures. I believe I have followed all of the procedures correctly from this and other forums on programming, but something is not working.

Any advice is greatly appreciated, and even better if there is anyone in the Northern VA area that is able/willing to help out that has successfully programmed these units?
Attached Images
File Type: jpg IMG_1002.JPG (447.5 KB, 23 views)
File Type: jpg IMG_1003.JPG (484.3 KB, 23 views)
Reply With Quote
  #4  
Old 07-13-2013, 08:44 AM
Junior Member
 
Join Date: Jun 2011
Location: poland
Car: acura
Posts: 14
Thanks: 3
Thanked 29 Times in 3 Posts
Default

which interface you use? you change the settings in the file NFS.INI? give the number of Case ECU ...
i think - use 7572342 nr it's nevest nr from SPdaten V49

Last edited by slaw1971; 07-13-2013 at 09:07 AM.
Reply With Quote
  #5  
Old 07-13-2013, 02:00 PM
Junior Member
 
Join Date: Jun 2013
Location: USA
Car: E39 M5
Posts: 3
Thanks: 1
Thanked 0 Times in 0 Posts
Default

Quote:
Originally Posted by slaw1971 View Post
which interface you use? you change the settings in the file NFS.INI? give the number of Case ECU ...
i think - use 7572342 nr it's nevest nr from SPdaten V49
I used STD:OBD interface with a K+DCAN cable. NFS.ini already had that interface. According to RealOEM 7571613 is the newest program # and 7572342 is newest Hw #.

I also found some info that trying to retrofit a used MS43 ECU (from another car) into this car cannot be done while in the e46 and has to be done on a bench. Also says that the bmw programs will not retrofit the ecu either. So also researching how to program on a bench.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
e70 CAS Module Flash Failed mp123 BMW Programmers 12 08-01-2015 09:21 AM
CAS Module Flash Failed mp123 X5 1 06-28-2013 09:04 PM
Change ICOM mac address on Laptop X61 alexG BMW ISIS, ICOM A+B+C, Esys 12 03-20-2013 10:07 PM
BMW ICOM MAC Address problem alexG BMW diagnostics and repair 0 05-14-2012 04:31 PM
GS-911 Emergency Diagnostic tool for BMW motorcycles autodiagnosticobd2 Off-topic 0 11-02-2011 02:53 AM


All times are GMT. The time now is 09:25 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.1
BMW forum: diagnostics, coding, programming.