BMW ICOM NEXT | BMW NBT EVO FSC Codes | BMW NBT & CIC FSC Codes | BMW Rheingold , ISTA/P, KSD, ETK remote installation | BMW STANDARD TOOLS remote installation | BMW ESYS remote installation
Go Back   BMW forum. Diagnostics, coding, programming, repair BMW vehicles. > BMWelcome > BMW coding and programming

Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 05-04-2014, 08:12 AM
Junior Member
 
Join Date: May 2013
Location: Sweden
Car: BMW 535dT 380hp/750nm
Posts: 7
Thanks: 0
Thanked 0 Times in 0 Posts
Lightbulb Finding newer IPO files for 2009+ modules?

Hello.

Inpa on e60 2007 LCI with Dcan-cable choosing wrong modules,

Some goes well but dde and gearbox and DSC etc. i get error that another module was expected.
.


Ok, done some more research. The EDIABAS version is not the problem.
The problem is that the .IPO files does not contain info for INPA to point it to the correct .prg files.

In this thread i found my self a working GS19.ipo that worked for my GS19D.prg that is for gearbox. Where do i find the rest of the newer .ipo files.. The daten files in different versions doesnt contain those files that i need, or maybe a specific daten version does? [Only for registered users... ]

My car i updated 2009 februari in all modules so i need IPO-files newer than 2009 but i dont know where to find them? I looked thru the different daten-files available out there but they do not contain updated ipo-files for the modules i need.





Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
reflasch CAS and synchronization with EGS and DME( E70, 2009/10 ) slaw1971 BMW coding and programming 15 08-07-2018 05:23 AM
Replace EKPM2 with newer EKPM3 and code chapelhill BMW coding and programming 9 09-21-2017 06:35 PM
BMW X5 E70 2009 xDrive35d (Diesel) yching X5 0 04-16-2014 07:40 PM
Not finding DME and EGS with pa soft Mandozip BMW Scanner (PASoft) 2 01-25-2014 04:57 PM
Finding ECU Address to use with NFS Emergency Flash trentmw BMW coding and programming 4 07-13-2013 02:00 PM


All times are GMT. The time now is 11:13 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.1
BMW forum: diagnostics, coding, programming.