BMW ICOM NEXT | BMW NBT EVO FSC Codes | BMW NBT & CIC FSC Codes | BMW Rheingold , ISTA/P, KSD, ETK remote installation | BMW STANDARD TOOLS remote installation | BMW ESYS remote installation
Go Back   BMW forum. Diagnostics, coding, programming, repair BMW vehicles. > BMWelcome > BMW coding and programming

Like Tree2Likes
  • 1 Post By BMR-E46
  • 1 Post By BMR-E46
Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 07-22-2015, 04:16 PM
Junior Member
 
Join Date: Jul 2015
Location: Norfolk
Car: E46 M3 Vert
Posts: 7
Thanks: 3
Thanked 0 Times in 0 Posts
Default Help with E46 GM5 coding needed please

Hi All,

I have been adjusting various settings using NCSExpert and most of what I want now works great.

I do however have a problem with the GM5 module, as far as i can tell I have everything set as it should be but despite this the roof will not go up and down on the remote, it does if I unlock/lock with the key and hold the key.

Also, my boot release button that was working fine now does not open the boot, this is on 2 keys so it must be something I am doing wrong.

Lastly all my windows open with one touch, including the button that does all 4, however none of them close with one touch, I think I have all settings correct in the file above so that they should close one touch too, very frustrating...

I have a a copy of my FSW.PSW,MAN here

[Only for registered users... ]

I would be really grateful if someone could have a look and let me know where I am going wrong.

Thanks,

Andy


Reply With Quote
  #2  
Old 07-23-2015, 12:07 PM
Junior Member
 
Join Date: Jul 2015
Location: Norfolk
Car: E46 M3 Vert
Posts: 7
Thanks: 3
Thanked 0 Times in 0 Posts
Default

Nobody, this has me stumped?
Reply With Quote
  #3  
Old 07-24-2015, 05:01 PM
Junior Member
 
Join Date: Jul 2015
Location: Norfolk
Car: E46 M3 Vert
Posts: 7
Thanks: 3
Thanked 0 Times in 0 Posts
Default

Apparently drop box keeps losing access to this file so I will paste the contents of the MAN file here in the hope that someone can help, thanks, Andy

WISCHERPOTI
aktiv
ANLAUFSTROMBEGRENZ_MEMO
aktiv
SCHEIBENABSENK_OHNE_EKS
aktiv
FH_NACH_TUERE_AUF
aktiv
E52_FUNKTIONEN
nicht_aktiv
FENSTERHEBER_VORNE
aktiv
DIFFERENZ_ANLAUF_BLOCK
wert_01
FH_FAHRERTUER_TIPP_AUF
aktiv
FH_BEIFAHRERTUER_TIPP_AUF
aktiv
FH_TUEREN_HINTEN_TIPP_AUF
aktiv
FH_ZTR_SCHALTER_TIPP_AUF
aktiv
FH_ZTR_SCHALTER_TIPP_ZU
aktiv
SCHEIBE_ABSENKZEIT
wert_01
ZEIT_TUER/SCHLIESSZEIT
wert_01
VERRIEGELN_AUT_AB_X_KM/H
aktiv
VERRIEGELN_AUT_NACH_2_MIN
nicht_aktiv
SOFT_ON/OFF
aktiv
IB_EIN_SCHLOSS_ENTRIEGELN
aktiv
IB_BEI_KL.R_AUS
aktiv_mit_kl.58
ABSCHALTUNG_VERBRAUCHER
aktiv
HECKKLAPPEN_LOGIK
geschlossen
KOMFORTSCHLIE_FB_OHNE_SHD
nicht_aktiv
EINGANG_2
nicht_aktiv
EINGANG_2_KONTAKT_GESCHL
nicht_aktiv
QUIT_AKUST_SCHAERF
aktiv
INNENLICHT_AN_MEHRFACH_ZV
aktiv
VERZUG_PANIK_MODUS_0.2_S
wert_01
VERRIEGELN_XKM/H_SENDER_1
aktiv
HKL_SPERREN_BEI_ZS
nicht_aktiv
VERRIEGELN_XKM/H_SENDER_2
aktiv
VERRIEGELN_XKM/H_SENDER_3
aktiv
VERRIEGELN_XKM/H_SENDER_4
aktiv
WISCHER_RUECK_GESCHW
wert_01
EKS_OFFEN/UNTERBRECHUNG
wert_01
EKS_GEDRUECKT/OFFEN
wert_01
CODIERUNG_ERFOLGT_1
codierung_erfolgt
VERRIEGELUNGSSCHWELLE
16_km/h
KOMFORTOEFFNEN_FB_O_FH_HI
nicht_aktiv
KOMFORTOEFFNEN_FB_O_SHD
nicht_aktiv
IB_SPERRE_BEI_FEHLER
aktiv
WISCHERINTERVALL
5_sec
ENTSICHERN_CENTERLOCK
aktiv
QUIT_AKUST_SCHAERF_KLAPPE
nicht_aktiv
QUIT_AKUST_ENTSCH
aktiv
ALARM_OPT_FERNLICHT
nicht_aktiv
PANIK_MODUS
nicht_aktiv
SCHEINWERFERREINIGUNG
aktiv
SENSOR_REGEN
aktiv
STANDRUECKSCHALTUNG
nicht_aktiv
HUB_VERZOEGERUNG_FH_VORN
aktiv
FUNKTIONTUERSCHLOSS
nicht_aktiv
FERNBEDIENUNG_1
nicht_aktiv
FERNBEDIENUNG_2
nicht_aktiv
FERNBEDIENUNG_3
nicht_aktiv
FERNBEDIENUNG_4
nicht_aktiv
FH_ABSCHALTKRITERIUM
ece
FH_ABSENKUNG_SPERREN
nicht_aktiv
FUNKTION_CABRIO
aktiv
KOMFORTOEFFNUNG_FB
aktiv
FH_ABSENKEN_VERDECK_OEFF
aktiv
AUSSTELLFENSTER
nicht_aktiv
FENSTERHEBER_HINTEN
aktiv
EINKLEMMSCH_VORNE
nicht_aktiv
EINKLEMMSCH_HINTEN
nicht_aktiv
EINKLEMMSCH_REVERSIEREN
lang
FH_FAHRERTUER_TIPP_ZU
aktiv
FH_BEIFAHRERTUER_TIPP_ZU
aktiv
FH_TUEREN_HINTEN_TIPP_ZU
aktiv
FUNKTIONEN_TOURING
nicht_aktiv
HECKSCHEIBE_ENTR_SENDER_1
nicht_aktiv
HECKSCHEIBE_ENTR_SENDER_2
nicht_aktiv
HECKSCHEIBE_ENTR_SENDER_3
nicht_aktiv
HECKSCHEIBE_ENTR_SENDER_4
nicht_aktiv
HECKSCHEIBE_ENTRI_INNEN
nicht_aktiv
KOMFORTSCHLIE_FB_O_FH_HI
nicht_aktiv
MAUT_ZU_STOP_N_TUER_AUF
nicht_aktiv
DWA
aktiv
NEIGUNGSGEBER
aktiv
FUNK_INNENRAUMSCHUTZ
nicht_aktiv
SCHAERFEN/ENTSCHAERFEN
nur_mit_fernbedienung
ALARM_AKUSTISCH
intervallton
ALARM_AKUSTISCH_LANG
aktiv
ALARM_OPT_WARNBLINKER
aktiv
ALARM_OPT_ABBLENDLICHT
nicht_aktiv
QUIT_OPT_SCHAERF
nicht_aktiv
QUIT_OPT_SCHAERF_KLAPPE
aktiv
QUIT_OPT_ENTSCH
nicht_aktiv
FUNKINNENRAUMSCHUTZ_HI
nicht_aktiv
FERNBEDIENUNG
aktiv
KOMFORTSCHLIESSUNG_FB
aktiv
IR_FERNBEDIENUNG
nicht_aktiv
TAKTUNG_IB
nicht_aktiv
TAKTUNG_VERBRAUCHERABSCHA
nicht_aktiv
FH_INIT_TRANSPORTMODE
nicht_aktiv
ASF_PARAMETER_VARIANTE
nicht_aktiv
KOMFOEFFNEN_SPERRE_KEY_IN
aktiv
BEDIENSTELLE_BFT
nicht_aktiv
Reply With Quote
  #4  
Old 07-27-2015, 10:51 PM
Member
 
Join Date: Jun 2011
Location: NL
Car: E46-330Ci
Posts: 37
Thanks: 0
Thanked 20 Times in 10 Posts
Default

Yeah settings are fine, it's weird that it's not working, I would try this.

With NCS try to code the GM5 to defaultsettings using the expertprofile, after that check if the trunk button works again. (Just read GM5, set JOB to SG_Codieren then Code it back)

Then change the GM5 settings again you want and check if the roof work this time.

If the windows one touch still not work, try to reinitialize them, put key in ignition and turn it to position 2 then press and hold the window button down, if it's fully down hold the button down for 10 sec longer, then hold window button fully up wait 10 sec longer.

When pushing the button down/up you need to press it fully down and up. (1-touch position)

If the window works, do the same with the other windows.
GlebeCS likes this.
Reply With Quote
  #5  
Old 07-29-2015, 10:58 AM
Junior Member
 
Join Date: Jul 2015
Location: Norfolk
Car: E46 M3 Vert
Posts: 7
Thanks: 3
Thanked 0 Times in 0 Posts
Default

Quote:
Originally Posted by BMR-E46 View Post
Yeah settings are fine, it's weird that it's not working, I would try this.

With NCS try to code the GM5 to defaultsettings using the expertprofile, after that check if the trunk button works again. (Just read GM5, set JOB to SG_Codieren then Code it back)

Then change the GM5 settings again you want and check if the roof work this time.

If the windows one touch still not work, try to reinitialize them, put key in ignition and turn it to position 2 then press and hold the window button down, if it's fully down hold the button down for 10 sec longer, then hold window button fully up wait 10 sec longer.

When pushing the button down/up you need to press it fully down and up. (1-touch position)

If the window works, do the same with the other windows.

Hi, thanks for that, I did the reinitialise on the windows, this has worked on the front 2 but not on the back 2 or the button that puts them all up, I will get my laptop hooked up later and try resetting GM5 and coding again, thanks for the advice so far, some progress thanks to you, at least the front windows now operate how I would like :)
Reply With Quote
  #6  
Old 07-30-2015, 11:30 PM
Member
 
Join Date: Jun 2011
Location: NL
Car: E46-330Ci
Posts: 37
Thanks: 0
Thanked 20 Times in 10 Posts
Default

Oke cool

Also remember that you need to modify the rear window buttons so they will get a second click up just like the front window buttons.

So you need to open up the switches and cut out a small piece of them so they will get a 2nd click UP. Now they have only a second click DOWN.

NCS - GM5 module

KOMFORTSCHLIE_FB_O_FH_HI nicht_aktiv Remote Close Rear Windows
MAUT_N_ABBRECH_N_TUER_AUF aktiv Rear Window One Touch Close (GM5.C04+)
MAUT_ZU_STOP_N_TUER_AUF nicht_aktiv Rear Window One Touch Close (GM5.C02)
FH_TUEREN_HINTEN_TIPP_ZU aktiv Rear Window One Touch Close
FH_ZTR_SCHALTER_TIPP_ZU aktiv Rear Window One Touch Close

I also did this with my vert.

[Only for registered users... ]
GlebeCS likes this.

Last edited by BMR-E46; 07-30-2015 at 11:51 PM.
Reply With Quote
The Following User Says Thank You to BMR-E46 For This Useful Post:
GlebeCS (08-02-2015)
  #7  
Old 08-02-2015, 02:27 AM
Junior Member
 
Join Date: Jul 2015
Location: Norfolk
Car: E46 M3 Vert
Posts: 7
Thanks: 3
Thanked 0 Times in 0 Posts
Default

Thats great, thanks, car is in the garage for service and new brakes plus a few other bits, I will try this when I get it back next week
Reply With Quote
  #8  
Old 08-09-2015, 09:08 PM
Junior Member
 
Join Date: Jul 2015
Location: Norfolk
Car: E46 M3 Vert
Posts: 7
Thanks: 3
Thanked 0 Times in 0 Posts
Default

Hi guys, got this mostly all working, I modified the switches and programmed as above, all windows are one touch including the switch that does them all, both up and down, apart from the passenger side windows which refuses to play ball, I did notice on NCSDummy there was something about passenger door controller which was set to nicht_aktiv, I might try changing that to aktiv , thanks again, Andy
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
HELP NEEDED ON CODING steering angle sensor jaima BMW coding and programming 1 12-19-2014 11:48 PM
E39 auto to manual swap coding info needed shaunmlavery BMW coding and programming 7 07-28-2014 02:41 AM
cas 4 coding needed glasgow area carbandit BMW ISIS, ICOM A+B+C, Esys 0 08-28-2013 08:16 PM
Help coding needed in Richmond Virginia mghollywood BMW coding and programming 0 06-04-2013 03:44 AM
E38 Coding needed oldmaddog BMW GT1, OPS/OPPS, INPA 1 10-13-2012 05:44 PM


All times are GMT. The time now is 07:52 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2018, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.1
BMW forum: diagnostics, coding, programming.