BMW ICOM NEXT | BMW NBT EVO FSC Codes | BMW NBT & CIC FSC Codes | BMW Rheingold , ISTA/P, KSD, ETK remote installation | BMW STANDARD TOOLS remote installation | BMW ESYS remote installation
Go Back   BMW forum. Diagnostics, coding, programming, repair BMW vehicles. > BMWelcome > BMW coding and programming

Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 12-28-2013, 10:16 AM
Junior Member
 
Join Date: Aug 2013
Location: lebanon
Car: bmw e46 325i sedan
Posts: 12
Thanks: 2
Thanked 2 Times in 2 Posts
Default help in replacing ecu

hello guys
i have a 2006 x3 3.0l engine
in cold starts the engine rpm hunts continuously until the temperature is in normal working state.
on the icom i can find error about throttle valve adaptation not met and spring actuation failed.
i changed 3 throttle valves and the same problem persists.
i think it needs a new DME
i wonder if i can replace the DME with a used one. since i have in the icom programing software a replace option.
so what do you think ? is it possible to do so ? and am i missing something?

i appreciate your help


Reply With Quote
  #2  
Old 12-31-2013, 06:30 AM
Member
 
Join Date: Jan 2013
Location: CA
Car: 03 x5,06 530xit,87 325is race car
Posts: 31
Thanks: 7
Thanked 3 Times in 3 Posts
Default

With a factory software you can only adapt new,or "renew-ed" ECU.To read,renew dump and write MS45 you will need BDM or desoldering the flash eprom.
Reply With Quote
  #3  
Old 01-14-2014, 03:55 PM
Junior Member
 
Join Date: Aug 2013
Location: lebanon
Car: bmw e46 325i sedan
Posts: 12
Thanks: 2
Thanked 2 Times in 2 Posts
Default

i changed the ezs and the dme together brought from the same car and everything woked fine :)
thank you
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
replacing a damaged ECU with a used one bachirnassif BMW coding and programming 4 10-23-2013 08:03 AM
mileage remains zero after replacing an Instrument Cluster on BMW X5 DKISSOONDOYAL BMW coding and programming 1 07-16-2013 03:13 PM
F30 - Replacing CiC with Head Unit high tomtom BMW coding and programming 3 05-30-2013 09:31 AM
Programming after replacing component moe325 BMW GT1, OPS/OPPS, INPA 0 01-30-2012 12:33 PM


All times are GMT. The time now is 04:13 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.1
BMW forum: diagnostics, coding, programming.