BMW ICOM NEXT | BMW NBT EVO FSC Codes | BMW NBT & CIC FSC Codes | BMW Rheingold , ISTA/P, KSD, ETK remote installation | BMW STANDARD TOOLS remote installation | BMW ESYS remote installation
Go Back   BMW forum. Diagnostics, coding, programming, repair BMW vehicles. > BMWelcome > BMW coding and programming

Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 11-22-2011, 08:53 AM
Junior Member
 
Join Date: Oct 2011
Location: Croatia
Car: BMW E36 320i (S50 3,2)
Posts: 4
Thanks: 0
Thanked 0 Times in 0 Posts
Default how to change miles to kilometers on the instrument cluster

hello
how to change miles to kilometers on the instrument cluster??


Reply With Quote
  #2  
Old 11-25-2011, 07:29 PM
Junior Member
 
Join Date: Nov 2011
Location: Bahrain
Car: bmw 740IL
Posts: 28
Thanks: 0
Thanked 1 Time in 1 Post
Default

if you have 1.4 PAsoft you can do it.

if u dont have you need to open the hidden OBC secret (cluster) with the code and then go to test number 12

how to access to the hidden OBC please find below:

To unlock the On-Board-Computer use the two Instrument Cluster buttons (L=Left, R=Right)

1) Press and hold "R" down for 5-6 seconds
2) You'll see TEST NR 01
3) Momentarily press "L"
4) You'll see your vin ID, for instance, mine is 08685
5) ADD THE DIGITS :: 8 + 6 + 8 + 5 = 27
6) press "R" again until you reach TEST NR 19
7) Press "L" to select
8) You'll see "LOCK: ON"
9) Press "L" until you reach "27" (the number that was the addition result)
10) AFTER you have the correct number showing, momentarily press the "R" button
11) Display will revert to TEST NR 01

The OBC is now unlocked


OBC HIDDEN INFORMATION



TEST-NR. 01
FGSTNR: GM8685 (VIN serial number)
K: 7744
BMWTNR: 8387061
CI:12 DI:06 BI:09
DAT: 43/98 (week and year of manufacture)
HW:04 SW:1100/1100
ZYL:08 M:4 S:4095 (cylinders, and what else?)
CAN:02 AEND:14

TEST-NR. 02
(Instrument test)

Only do this test in Ignition Position I or II with the engine not running


TEST-NR. 06
TNK: 7.5/31.0/38.5L (current fuel levels: left, right, total)
TNKANZ: 39.4L PHASE1 (average total fuel level)



TEST-NR. 07
KTMP: xxxC (engine core temperature)
N: xxxxx U/MIN (engine RPM)
ATMP: +xx.0C (ambient temperature)


TEST-NR. 08
V: xxx KM/H (current velocity)

TEST-NR. 09
VB: xx.x V (battery voltage)

Useful for battery condition tests. Engine not running value should be above 12V....cranking voltage should not drop below 9V. When fully charged the voltage should show > 14V

TEST-NR. 10
LAND: 02 US (country of sale?)

TEST-NR. 11
EINHEIT 1: F7
EINHEIT 2: FA
EINHEIT 3: 4A


TEST-NR. 12
VANK: xxx.x KM/H
ANK: --:--


TEST-NR. 13
GONG


TEST-NR. 14
DIAG: 1 C7 81 000
DIAG: 2 00 00 000
DIAG: 3 00 00 000
DIAG: 4 00 00 000
DIAG: 5 00 00 000


TEST-NR. 15
PORT A00: xxxxxxxx
PORT A01: 00000111
PORT A02: xx0x0001
PORT A03: 00000011
PORT A04: 000x0101
PORT A05: 001B1111
PORT A06: 00110101
PORT B00: xxxxxxxx
PORT B01: 00100010
PORT B02: xx0x0110
PORT B03: x0111001
PORT B04: 000x1111
PORT B05: 11100111
PORT B06: 00000000

Tests No 15 and 16 show internal register values


TEST-NR. 16
OELTEMP: -48C

Oil Temperature

TEST-NR. 17
RCC-EMPF.: ----MIN


TEST-NR. 18
(No response)

TEST-NR. 19
LOCK: OFF (press Reset to turn the lock back on)

TEST-NR. 20
KVBR: 1000

KVBR is the correction factor for the fuel-consumption meters. By default it is set to '1000'. Adjustment of this default value will give erroneous MPG figures

TEST-NR. 21
RESET all values to default and LOCK the OBC
Reply With Quote
  #3  
Old 11-29-2011, 07:53 AM
Junior Member
 
Join Date: Oct 2011
Location: Madrid
Car: E60 530d
Posts: 19
Thanks: 4
Thanked 2 Times in 1 Post
Default

You can do with NCS Expert. Just read Kombi ecu and with NCS Dummy change those value.
Reply With Quote
  #4  
Old 12-12-2011, 12:53 PM
Junior Member
 
Join Date: Oct 2011
Location: Croatia
Car: BMW E36 320i (S50 3,2)
Posts: 4
Thanks: 0
Thanked 0 Times in 0 Posts
Default

THANKS GUYS
guestion for E36
Reply With Quote
  #5  
Old 05-15-2013, 10:29 AM
Junior Member
 
Join Date: May 2013
Location: Romania
Car: BMW E36
Posts: 2
Thanks: 0
Thanked 0 Times in 0 Posts
Default how to change miles to kilometers on the instrument cluster

you can set your instrument cluster?
Reply With Quote
  #6  
Old 05-15-2013, 10:31 AM
Junior Member
 
Join Date: May 2013
Location: Romania
Car: BMW E36
Posts: 2
Thanks: 0
Thanked 0 Times in 0 Posts
Default how to change miles to kilometers on the instrument cluster

Quote:
Originally Posted by k.m. View Post
THANKS GUYS
guestion for E36
you set your instrument cluster? and how?
Reply With Quote
  #7  
Old 05-25-2013, 05:20 PM
Junior Member
 
Join Date: May 2013
Location: Ukraine
Car: BMW
Posts: 2
Thanks: 0
Thanked 0 Times in 0 Posts
Default

Please, which one tool you've used?
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
How to access the test functions of instrument cluster on BMW's F10, F01, F02, F25 Admin DIY guides 2 10-15-2012 10:03 AM
Coding Options e89 - Digital Speed and open the roof till 20 miles zcode BMW coding and programming 6 12-15-2011 11:26 PM
E93 VIN Change RageStyling BMW GT1, OPS/OPPS, INPA 2 07-07-2011 08:19 PM
Repairing instrument cluster M6BrokeMe BMW diagnostics and repair 0 07-06-2011 12:32 AM


All times are GMT. The time now is 12:18 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2018, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.1
BMW forum: diagnostics, coding, programming.