BMW ICOM NEXT | BMW NBT EVO FSC Codes | BMW NBT & CIC FSC Codes | BMW Rheingold , ISTA/P, KSD, ETK remote installation | BMW STANDARD TOOLS remote installation | BMW ESYS remote installation
Go Back   BMW forum. Diagnostics, coding, programming, repair BMW vehicles. > BMWelcome > BMW coding and programming

LinkBack Thread Tools Display Modes
Old 02-09-2015, 09:19 AM
Join Date: Sep 2014
Location: Fujian
Car: BMW
Posts: 1
Thanks: 1
Thanked 0 Times in 0 Posts
Default How to use BMW&Rolls Royce Easycoding

EASYCODING is a newly developed diagnostic system by UCANDAS Tech for newer BMW and Rolls Royce vehicles from year 2012 to 2014. Following displays the step-by-step on how to use the EASY CODING diagnostic interface.
Computer Configuration:
System requirement: WINDOWS System, XP SP3, WINDOWS7 and WINDOWS8.
Computer requirement: at least 2GB system RAM and 4GB HDD space.
Vehicle condition:
1) Ensure battery is in good condition and higher than 12 V voltage. Besides, there is not insufficient voltage.
2) Turn vehicle ignition to ON position without start the engine and turn off other applicants in the car.
Network setting:
Please check the Cable Network Setting in your computer and configure your computer to obtain an IP address automatically instead of using an assigned IP address.
1.EASY CODING connection
1) Locate the vehicle OBD diagnostic port
2) Plug the ENET connecter into the OBD diagnostic socket. The connector indicator light will turn on and the connecter is powered by OBD port.

NOTE: If the indicator light does not turn on, check the connection between vehicle OBD port and ENET connector Once the connection is built, the BR6 software is ready to use..
2.Software installation:
Plug the dongle into the computer USB port. No need to install driver. Click the “EASY CODING” icon on the desktop to run software.
NOTE: If the device is not connected to a car, the “Diagnosis” function will not work and the light on the status bar will be gray
3.Diagnostic operation:
1) When the “Diagnosis” button turns on, the software is ready to start See Fig 1..:

It takes about 40 seconds to log vehicle data before first diagnosis. The time may vary on different cars because of different system configuration.
2) Then, software will read VIN code automatically and display vehicle information If your vehicle information is not displayed, please contact your dealer to provide the latest upgraded vehicle data See Fig 2…:

3) Click “Next” to check full vehicle information Click “Back” to return to previous menu Press “OK”, enter the next menu See Fig 3..:
4) Diagnostic function has two options:. “DTC” and “Personalize Setting” Choose the function you want and carry out diagnosis.

Reply With Quote
Old 02-23-2015, 09:05 PM
Join Date: May 2012
Location: LUTON
Car: F10 520D and F10 M5
Posts: 48
Thanks: 0
Thanked 3 Times in 3 Posts
Default hello

where do i buy one of these?
Reply With Quote

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

All times are GMT. The time now is 02:28 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2020, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.1
BMW forum: diagnostics, coding, programming.