BMW ICOM NEXT | BMW NBT EVO FSC Codes | BMW NBT & CIC FSC Codes | BMW Rheingold , ISTA/P, KSD, ETK remote installation | BMW STANDARD TOOLS remote installation | BMW ESYS remote installation
Go Back   BMW forum. Diagnostics, coding, programming, repair BMW vehicles. > BMWelcome > BMW coding and programming

Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 07-12-2016, 08:31 PM
Junior Member
 
Join Date: Sep 2015
Location: Scotland
Car: 1M
Posts: 4
Thanks: 2
Thanked 1 Time in 1 Post
Default ISTA-D Help needed

i have a little problem ?

I have just got a copy of Rheingold ista-D and P
the cable i have is Ediabas D-CAN usb it works with my INPA but it doest work with ista do i need the K+DCAN cable or should this one work ?

I am trying to get it to work on my 1M coupe



Reply With Quote
  #2  
Old 07-14-2016, 11:33 AM
Junior Member
 
Join Date: Sep 2015
Location: Scotland
Car: 1M
Posts: 4
Thanks: 2
Thanked 1 Time in 1 Post
Default

No One
Reply With Quote
  #3  
Old 07-19-2016, 01:38 PM
Junior Member
 
Join Date: Jun 2013
Location: .
Car: .
Posts: 2
Thanks: 0
Thanked 2 Times in 1 Post
Default

Did you set ediabas in VCI Config tab?
Reply With Quote
  #4  
Old 07-19-2016, 08:14 PM
Junior Member
 
Join Date: Oct 2011
Location: Outside Boston
Car: E60 M5
Posts: 2
Thanks: 0
Thanked 0 Times in 0 Posts
Default

ISTA-D & ISTA-P Rheingold use the ethernet interface to connect to the car or to ICOM. The ICOM will then do the translation for the KLINE & DCAN interface. I have seen videos on youtube from Rheingold of them using the older cables though. You should look into using an ICOM emulator which may be what you need for coding and diagnostics. I haven't used one so I can't guide you there. Programming may be another story depending on the car model. The newer Fxx series use ethernet only but you can build or buy a cable for cheap and most all Exx series require a MOST connector (fiber optic) for programming of modules (but not coding). The moral of the story is that if you need to program things using ISTA-P (or manually) get an ICOM.
Reply With Quote
  #5  
Old 07-22-2016, 03:00 PM
Junior Member
 
Join Date: Sep 2015
Location: Scotland
Car: 1M
Posts: 4
Thanks: 2
Thanked 1 Time in 1 Post
Default

All sorted and the USB cable works i was using the old Ediabas

Updated it and good to GO
just need to get a copy of E-SYS now
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Installations hilfe ISTA-D Reingold & ISTA-P+Tools samooo BMW Programmers 2 12-15-2016 06:36 AM
Adding printing support to ISTA/P ISTA/D native install ejs BMW ISIS, ICOM A+B+C, Esys 10 11-20-2015 11:02 PM
Bmw isid native install (ista/d + ista/p) Admin BMW ISIS, ICOM A+B+C, Esys 15 07-16-2014 02:15 AM
BMW ISID 3.1 Native install on Lenovo ISTA-D 2.35 ISTA-P 2.48.2 Admin BMW ISIS, ICOM A+B+C, Esys 0 02-04-2013 11:30 PM
Help needed.. sebbe76 BMW GT1, OPS/OPPS, INPA 2 01-25-2012 06:18 AM


All times are GMT. The time now is 05:15 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.1
BMW forum: diagnostics, coding, programming.