BMW ICOM NEXT | BMW NBT EVO FSC Codes | BMW NBT & CIC FSC Codes | BMW Rheingold , ISTA/P, KSD, ETK remote installation | BMW STANDARD TOOLS remote installation | BMW ESYS remote installation
Go Back   BMW forum. Diagnostics, coding, programming, repair BMW vehicles. > BMWelcome > BMW coding and programming

Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 01-20-2015, 04:13 AM
Junior Member
 
Join Date: Dec 2013
Location: South Africa
Car: BMW 330d e90
Posts: 6
Thanks: 0
Thanked 1 Time in 1 Post
Default Mulf 2 USB enable on CCC iDrive

Ok guys

I have been through 100's of pages and cannot find the answer to my dilemma.

I have a 2007 e90 with CCC Idrive. I installed an mulf 2 svs high and retrofitted the USB/AUX port in the center console. I already had just the aux port but removed it and installed USB/AUX unit.

I added $644 and $6FL to my CAS and FRM. Wrote blank man files to my 2MULF,CAPPL and CAS. After this it brought up my bluetooth in the Idrive settings menu. Got the bluetooth working 100%
Now my problem is that the USB option does not come up anywhere.<br />
I checked and the cars without Idrive that has the RAD2 module is easy to configure as settings the USB option to ON in the RAD2. But nowhere can I find the correct option/combination to enable the USB to display.

Please if anyone can assist. I am pulling my hair out already. On the internet everyone that has done this has done it to cars without Idrive but nowhere can I find someone that had document it for car with idrive.

I posted this on other forums as well and no one could help so far.


Reply With Quote
  #2  
Old 01-22-2015, 04:37 AM
Junior Member
 
Join Date: Dec 2013
Location: South Africa
Car: BMW 330d e90
Posts: 6
Thanks: 0
Thanked 1 Time in 1 Post
Default

Anyone?? Where is the guru's
Reply With Quote
  #3  
Old 06-29-2018, 09:00 PM
Junior Member
 
Join Date: May 2013
Location: uk
Car: 535 e61
Posts: 2
Thanks: 0
Thanked 0 Times in 0 Posts
Default

Did u ever get this working ? I am having the same issue im guessing my 2006
ccc Idrive mask is too old to have the usb option and would need a firmware update which i dont think i can do via dcan
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
How to enable aux in on ccc modul? djshone BMW GT1, OPS/OPPS, INPA 3 02-14-2015 01:36 PM
enable highbeam DRL and fogs as cornering lights rvdweijer DIY guides 1 07-28-2014 06:11 PM
enable highbeam DRL rvdweijer BMW coding and programming 0 05-09-2014 01:59 PM
Aux Heater (Webasto) enable timer function Rosiebs_dad BMW GT1, OPS/OPPS, INPA 0 11-18-2013 08:41 PM
CCC to CIC idrive controller E70 lex30d BMW coding and programming 1 07-10-2013 08:10 AM


All times are GMT. The time now is 11:52 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.1
BMW forum: diagnostics, coding, programming.