BMW ICOM NEXT | BMW NBT EVO FSC Codes | BMW NBT & CIC FSC Codes | BMW Rheingold , ISTA/P, KSD, ETK remote installation | BMW STANDARD TOOLS remote installation | BMW ESYS remote installation
Go Back   BMW forum. Diagnostics, coding, programming, repair BMW vehicles. > BMWelcome > BMW coding and programming

Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 11-23-2015, 11:26 PM
Junior Member
 
Join Date: Nov 2015
Location: Portugal
Car: BMW E60
Posts: 3
Thanks: 0
Thanked 0 Times in 0 Posts
Default NCS Expert - COAPI-1000 Error - Can't read FA/VO

Hello everyone,

I really need some help on this.. can't figure out what's wrong!
Well, i've always been able to code my car wihout any problem.. until i've used AUTOCOM to register a new battery..

Since that, when i select to read the FA from CAS/LMA i got this messages:

Unvalid Mark-1
Unvalid Mark-2 $724

When i enter the CHASSIS and the VO manually, i remove that $724 but when i click BACK, it throws the COAPI-1000 Error.. and i can't acess any ECU in the car. :-/


I've already updated CAS and SGM (SP-DATEN v57) via WINKFP without success...

When i updated the SGM i've lost my active steering and i can't code it because i'm not able to access any module..

Any help would be REALLY appreciated!


Thanks in advance.

Kind regards,
MB

Last edited by psycosonic; 11-24-2015 at 12:37 AM.


Reply With Quote
  #2  
Old 11-24-2015, 12:37 AM
Junior Member
 
Join Date: Nov 2015
Location: Portugal
Car: BMW E60
Posts: 3
Thanks: 0
Thanked 0 Times in 0 Posts
Default

ERROR.LOG


[00:10:48.678] [2015-11-21] [SERIE] 4514 Trace AT_PROC.C isAuftragValid 1
[00:10:48.678] [2015-11-21] [SERIE] Job invalid Mark Not Valid: $724

[00:10:48.678] [2015-11-21] [SERIE] 1180 Error COAPI4.CPP coapiSetAuftrag 3
[00:10:48.678] [2015-11-21] [SERIE] vehicle job is invalid

[00:10:49.197] [2015-11-21] [SERIE] 1180 Error COAPI2.CPP coapiRunCabd 6
[00:10:49.197] [2015-11-21] [SERIE] vehicle job is invalid FA_READ

[00:10:49.199] [2015-11-21] [SERIE] 1180 Error COAPI4.CPP coapiReadAuftrag 4
[00:10:49.199] [2015-11-21] [SERIE] vehicle job is invalid FA_READ: A_E65CAS

[00:10:49.199] [2015-11-21] [SERIE] 1000 Warning COAPI.CPP coapiReadFgNr 9
[00:10:49.199] [2015-11-21] [SERIE] Error CAS

================================================== ==============================(2)
[00:10:49.898] [2015-11-21] [SERIE] 4514 Trace AT_PROC.C isAuftragValid 1
[00:10:49.898] [2015-11-21] [SERIE] Job invalid Mark Not Valid: $724

[00:10:49.900] [2015-11-21] [SERIE] 1180 Error COAPI4.CPP coapiSetAuftrag 3
[00:10:49.900] [2015-11-21] [SERIE] vehicle job is invalid
Reply With Quote
  #3  
Old 11-27-2015, 08:34 PM
Junior Member
 
Join Date: Sep 2014
Location: San Jose, Ca
Car: all of them
Posts: 5
Thanks: 0
Thanked 1 Time in 1 Post
Default

This happened right after registering new battery? Did you change battery size? Or just register new battery?
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Coapi-1043 error in mask reading Pinxolas BMW GT1, OPS/OPPS, INPA 3 03-02-2017 05:29 AM
Need help Kombi ecu coapi 1000 error Bignose BMW coding and programming 3 07-14-2015 09:25 PM
[E61] NCS Expert: Error in CABD! Look at CABI.err and ERROR.LOG. COAPI-1043... rathersmart BMW coding and programming 0 10-03-2014 08:57 PM
COAPI-2000, BIP-0009 error weiss BMW GT1, OPS/OPPS, INPA 6 03-19-2013 02:25 PM
Coapi error 1043 skipper69 BMW GT1, OPS/OPPS, INPA 5 07-18-2012 03:31 AM


All times are GMT. The time now is 07:43 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2018, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.1
BMW forum: diagnostics, coding, programming.