BMW ICOM NEXT | BMW NBT EVO FSC Codes | BMW NBT & CIC FSC Codes | BMW Rheingold , ISTA/P, KSD, ETK remote installation | BMW STANDARD TOOLS remote installation | BMW ESYS remote installation
Go Back   BMW forum. Diagnostics, coding, programming, repair BMW vehicles. > BMWelcome > BMW coding and programming

Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 09-25-2018, 03:26 PM
Junior Member
 
Join Date: Sep 2018
Location: Netherlands
Car: E91LCI 318D
Posts: 2
Thanks: 0
Thanked 1 Time in 1 Post
Default Winpfk updating Communication Protocol ICOM

I am working my way towards an update of the DDE via ICOM. I have already updated my IHKA and PDC module via a K+DCAN cable and winpfk in comfort mode. That worked out well. Since the DDE, DSC, EPS and EKPS are the only ones on the most loop according to the visual overview in ISTA/D, I figured that I needed an ICOM A+B. I do have a proper 40 amps 13.8V stabilized power supply at hand. I have Easy Connect installed, though am not sure which communication protocol to use for the ones on the most and the others as well. For the CCC, MASK and MOST I read to use MOST_ASYNC or MOST_ASYNC_625. Though if I look at the modules in ISTA/D these are not the most loop. So, the essential questions that I have are:

* What should I use for updating all on the most ring; DDE, etc? (Most, Most ASYNC or Most ASYNC 625?)
* What should I use for updating all the others on the K-CAN? (DIAGBUS, OBD_625 or a most variant?)
* And since the CIC is on the K-CAN, do I still have to use MOST_ASYNC or MOST ASYNC 625 for this?

I appreciate your help. Thanks



Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
New ICOM A2 restarts and loses communication gumes BMW ISIS, ICOM A+B+C, Esys 7 12-13-2017 04:51 PM
ICOM B no communication jurg_han BMW coding and programming 0 03-19-2015 04:00 PM
Teves MK60 PT CAN Protocol Camber BMW Programmers 1 12-03-2014 12:00 AM
Teves MK60 PT CAN Protocol Camber BMW coding and programming 0 11-14-2014 05:50 AM
BMW X3 year 2010 with ds2 protocol diagnostics Pashkustva BMW diagnostics and repair 0 09-07-2011 08:49 AM


All times are GMT. The time now is 08:21 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.1
BMW forum: diagnostics, coding, programming.