BMW ICOM NEXT | BMW NBT EVO FSC Codes | BMW NBT & CIC FSC Codes | BMW Rheingold , ISTA/P, KSD, ETK remote installation | BMW STANDARD TOOLS remote installation | BMW ESYS remote installation
Go Back   BMW forum. Diagnostics, coding, programming, repair BMW vehicles. > BMWelcome > BMW coding and programming

Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 01-04-2013, 07:09 PM
Junior Member
 
Join Date: Jan 2013
Location: Madrid
Car: X5 e70
Posts: 2
Thanks: 0
Thanked 0 Times in 0 Posts
Default X5 E70 manual doesn't work for me

I've got a 2011 X5 E70 with professional navi and top hifi.

The car was buyed in America where I lived last 4 years.

Since I live in Spain right now it is not possible for me to set radio stations like 98.0 or 96.4. Only odd decimals are allowed (US configuration). I've looking for weeks in forums and found nothing.

This trick doesn΄t work for me to access radio service mode.

"Service Mode is Accessed as Follows:
• Open Start menu
• Press and hold the controller for at least 10 seconds
• Move the controller 3 stops to the right
• Move the controller 3 stops to the left
• Move the controller 1 stop to the right
• Move the controller 1 stop to the left
• Move the controller 1 stop to the right
• Press the controller once.
Note: To exit Service mode press the Menu button."

I've tried a trick from E90 idrive that reveals a service mode with info about GPS, telephone and Gracenote, but not radio settings.

Any help?

Thank you.


Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Brand New key wont work? ggemen DIY guides 5 12-24-2012 02:42 AM
Will key still work if I change VIN in CAS and DME? Gee_115 BMW coding and programming 0 07-04-2012 03:18 PM
car does not work jamelkhalil BMW GT1, OPS/OPPS, INPA 0 07-03-2012 10:42 AM
BMW Scanner 2.0.1 - Work with ECU MSD80? Crazer09 BMW Scanner (PASoft) 0 04-24-2012 11:12 AM
Will it work? Meric BMW Scanner (PASoft) 1 12-31-2011 11:27 AM


All times are GMT. The time now is 03:18 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.1
BMW forum: diagnostics, coding, programming.