BMW ICOM NEXT | BMW NBT EVO FSC Codes | BMW NBT & CIC FSC Codes | BMW Rheingold , ISTA/P, KSD, ETK remote installation | BMW STANDARD TOOLS remote installation | BMW ESYS remote installation
Go Back   BMW forum. Diagnostics, coding, programming, repair BMW vehicles. > BMWelcome > BMW diagnostics and repair

LinkBack Thread Tools Display Modes
Old 03-16-2019, 06:04 PM
Junior Member
Join Date: Mar 2019
Location: Idaho
Car: 2001 X5
Posts: 1
Thanks: 0
Thanked 0 Times in 0 Posts
Default 2001 X5 (E53) Stutters and Stops

Good day and thank you a head of time for your help!

WHAT: BMW X5 2001 (E53) (S/N: lm65545)

STORY: Off and on this winter I have received a P0492. I thought it was just the cold. Then recently it started to stutter and stall. When I restarted it would be okay for a moment then start the stuttering again. When I went in for the codes it gave P0335 (crankshaft sensor fault), P0492 (Secondary Air) and all cylinders misfired. So, I decided to replace the vacuum tubing (everything down from the Secondary Air Injection Control Valve) for the P0492 problem hoping that would help the P0335, as my research showed that might take care of both. Nope. After driving, following the vacuum tube replacement, it ran well for a mile or so then started to stutter and stall again, requiring that I drive very conservatively and limp into the parts store who read new codes.


  • P1602 (Control Module Self Test, Control Module Defective)
  • P0335 (Crankshaft Position Sensor A Circuit Malfunction)
  • P0492 (Secondary Air Injection System Insufficient Flow Bank 2)
  • P0727 (Engine Speed Input Circuit No Signal)
  • P0102 (Mass or Volume Air Flow "A" Circuit Low Input)
  • P0340 (Camshaft Position Sensor Circuit Malfunction (Bank 1))


Thank you for your help!

Reply With Quote

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
2001 E53 DME (used) swap what tool i need to? papiarea BMW coding and programming 0 08-31-2018 08:11 PM
2001 318i aditechnz BMW diagnostics and repair 0 06-22-2018 01:35 PM
E46 learn Valvetronic end stops whillis BMW GT1, OPS/OPPS, INPA 6 01-13-2015 02:28 PM
ICOM A2 stops working when switching jaki BMW ISIS, ICOM A+B+C, Esys 1 03-31-2014 03:40 PM
2001 E38 728i LCM coding issues!!! Ingussc BMW diagnostics and repair 0 08-02-2012 01:56 PM

All times are GMT. The time now is 04:36 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.1
BMW forum: diagnostics, coding, programming.