BMW ICOM NEXT | BMW NBT EVO FSC Codes | BMW NBT & CIC FSC Codes | BMW Rheingold , ISTA/P, KSD, ETK remote installation | BMW STANDARD TOOLS remote installation | BMW ESYS remote installation
Go Back   BMW forum. Diagnostics, coding, programming, repair BMW vehicles. > BMWelcome > BMW diagnostics and repair

Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 03-30-2018, 06:26 PM
Junior Member
 
Join Date: Mar 2018
Location: FTB
Car: BMW 318TI/M3
Posts: 1
Thanks: 0
Thanked 0 Times in 0 Posts
Default BMW DME 5.2 Error 121 Help

Hi guys,

I have a 98 E36 318ti with the 5.2 DME - I keep getting a recurring CEL with error code 121 - "Hoehenadaption Fehler" I can't find information for this error anywhere (yes its my only error).

Backstory on the car - I purchased it with CELs for the O2 (rear) and knock sensors. I replaced the knock sensors and the cat with one from a 95 318 (welded on a rear bung). I also deleted the SAP and put in a circuit to emulate 0.2V when the SAP is supposed to be on to keep everything happy. I added an Oil catch can between the valve cover and the PCV valve. After finishing the word, I get this one and only failure.

I have cleaned and even replaced the ICV as the idle was quite high after the work was completed and the car ran great while the CEL was off - in fact, the car runs great with the only exception being the idle being rough when after the CEL comes on. I check for vacuum leaks and found none...

Any ideas?


Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
[E61] NCS Expert: Error in CABD! Look at CABI.err and ERROR.LOG. COAPI-1043... rathersmart BMW coding and programming 0 10-03-2014 08:57 PM
NCS Error iph-0006 EDIABAS or SGBD Error thisizaremix BMW GT1, OPS/OPPS, INPA 5 06-09-2014 07:26 PM
Job Status Error [Error ECU Rejected] instead of [Okay] when trying to clear SRS ligh cboy BMW GT1, OPS/OPPS, INPA 2 04-21-2012 08:43 PM


All times are GMT. The time now is 10:53 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.1
BMW forum: diagnostics, coding, programming.