BMW Icom Comunication problem

[alexG]

Hello to All
2 days ego i got problem my icom stop comunicate .I change cable,nothing.
My laptop and PC dont see device . i used it for 1 year with no problems ,one day i try to do diagnostic and nothing .pleas help me how to make it work or how to update firware . I use angry IP to find icom ip adress but nothing good. Pleas

[bmwdiag14]

You have two choise now:
1.Use webbrowser ( 192.168.x.x:60080) you will find the user name and password on the forum,and flash ICOM with files from ISIS server.
2.Use ICOM emergency flash procedure with USB stick and then connect ICOM to server.

Regards!

[alexG]

Hi.I tryed webbrowser ( 192.168.x.x:60080) and it not working . My browser dont see icom.How to flash with USB pleas expline more .
Thanks

[bmwdiag14]

1. Put this on blank txt file called "user.settings"

ConnectionMode = STATIC_IP
Ip = 192.168.68.85
Netmask = 255.255.255.0
Gateway = 192.168.68.99

2.Set you laptop to static ip: 192.168.68.99
3.Download firmware files from ISIS server to your laptop.
4.Put file user.settings on FAT32 formated USB stick on the root of the stick.
5.Power off ICOM and connect usb stick to it.
6.Power on ICOM with stick connected and you will see the ICOM start falshing red.
7.Wait till all leds is greeen and connect ethernet cable between ICOM and your laptop and disconnect USB stick.
8.Start a webbrowser : 192.168.68.85:60080
9.Login to the ICOM and start firmware update with files witch already downloaded from server to your laptop.
10.After updates is finnish power off your ICOM for 5 minutes and power on again,after that you will see your ICOM in WSM.

Regards!

[davidemx]

Hy, you have try to reset the icom with the reset button?
Best Regard Davide.

[alexG]

Thanks a lot bmwdiag14 i will try tomorrow .
I did try do reset -no-p

[cafeman2011]

Originally Posted by alexG

Hello to All
2 days ego i got problem my icom stop comunicate .I change cable,nothing.
My laptop and PC dont see device . i used it for 1 year with no problems ,one day i try to do diagnostic and nothing .pleas help me how to make it work or how to update firware . I use angry IP to find icom ip adress but nothing good. Pleas

check this video on how to setup BMW ICOM driver and make it successfully communicate.
[Only for registered users... ]

[530d]

video not working :(

[jaza45]

Does anybody knows where I can find a copy of that video?

[alexG]

Thanks to all ,looks like my icom was DAD. i replace it and OK.