BMW ICOM NEXT | BMW NBT EVO FSC Codes | BMW NBT & CIC FSC Codes | BMW Rheingold , ISTA/P, KSD, ETK remote installation | BMW STANDARD TOOLS remote installation | BMW ESYS remote installation
Go Back   BMW forum. Diagnostics, coding, programming, repair BMW vehicles. > BMWelcome > BMW diagnostics and repair

Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 04-03-2018, 09:58 AM
Junior Member
 
Join Date: Jan 2017
Location: United Kingdom
Car: bmw
Posts: 3
Thanks: 0
Thanked 0 Times in 0 Posts
Default CAS2 Problem. Any help gratefully received.

I had a dead CAS2.

I acquired a good identical unit planning to write the data - which I could read OK - to the "new" one.

I wrote the eeprom to the "good" module and it promptly died with the same symptoms as the original.

I restored the "good" one's original eeprom and all is well again with the "good" module.

How do I get the data I need out of the obviously corrupted dump and write it to the "good" one? At what addresses are all the important bits?

Or can anyone look at the dump and point me to the corruption?


Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Retrofitting start/stop button on 2003 E64 (cas2 to cas3 convertion) Mishka BMW coding and programming 0 04-09-2016 10:26 AM
Progman Bricked my CAS2 on E60 s_cowen BMW coding and programming 4 02-02-2015 09:57 AM


All times are GMT. The time now is 03:09 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.1
BMW forum: diagnostics, coding, programming.