BMW ICOM NEXT | BMW NBT EVO FSC Codes | BMW NBT & CIC FSC Codes | BMW Rheingold , ISTA/P, KSD, ETK remote installation | BMW STANDARD TOOLS remote installation | BMW ESYS remote installation
Go Back   BMW forum. Diagnostics, coding, programming, repair BMW vehicles. > BMWelcome > BMW diagnostics and repair

Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 01-27-2013, 07:50 AM
Junior Member
 
Join Date: Jan 2013
Location: Germmany
Car: 525dA Touring
Posts: 1
Thanks: 0
Thanked 0 Times in 0 Posts
Default E39/525d failure of several functions

Dear all,
I had small crash front right. Some electronics part had been involved but meanwhile temporally repaired.
* right indication lamp broken, exchanged
* one PDC sensor cable broken, repaired
* external temp sensor ripped of, new connector and sensor installed
The functions are ok again.
Still the right front side, bumper and headlight (only some plastics and glass, still fully functional) is broken.

The car had no problems but since last week the first problem occurs

Total failure of central locking - both via remote or key-lock

I disconnected the battery and after reconnect it works.

4 hrs later after a short ride same problem.

Dis- and reconnect did not help to solve the problem.

Than one day later:
* Total failure of central locking
* total failure of seat-heating
* failure of rear power windows
* failure seat memory
* radio, nav and BM do not shut down.
* rear wiper - if on - runs continuously

When I remove fuse F56 still 1.5 amps current over 30 minutes

I'm really lost and would be very thankful for any hint.
Best regards
Uwe

Last edited by Willythecat; 01-27-2013 at 11:25 AM.


Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
2004 525d e60 seatbelt warning light border boomdog BMW coding and programming 1 02-09-2015 02:55 AM
How to access the test functions of instrument cluster on BMW's F10, F01, F02, F25 Admin DIY guides 2 10-15-2012 10:03 AM


All times are GMT. The time now is 01:03 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2018, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.1
BMW forum: diagnostics, coding, programming.