BMW ICOM NEXT | BMW NBT EVO FSC Codes | BMW NBT & CIC FSC Codes | BMW Rheingold , ISTA/P, KSD, ETK remote installation | BMW STANDARD TOOLS remote installation | BMW ESYS remote installation
Go Back   BMW forum. Diagnostics, coding, programming, repair BMW vehicles. > BMWelcome > BMW diagnostics and repair

LinkBack Thread Tools Display Modes
Old 08-13-2013, 09:15 AM
Junior Member
Join Date: Aug 2013
Location: Dorset
Car: E53 2003 3.0i
Posts: 1
Thanks: 0
Thanked 0 Times in 0 Posts
Default E53 3.0i EML on multiple codes

BMW X5 3.0i 2003 EML intermittently on/off past months.
I need help to establish true cause of this EML fault.
No obvious symptoms when driving.
Local garage has read and reset fault codes but same codes coming up over time.
238, 239, 240,241,242,243 (This says misfire detected on all cylinders).
202 & 203 This says O2 sensor bank 1 & 2 reached their control limit.
228 227 This says O2 sensors control deviation (whatever that means)

15 months ago EML light on solid caused by perished rubber intake boot. This was replaced along with a routine service where genuine plugs and filters fitted. Vehicle has run some 11 months (10k) without issue till current EML issue these past months. Have checked rubber boot area appears O/K. Have replaced the MAF as this could be a common element but no change to EML fault. What else is common that can cause such codes.

Reply With Quote
Old 10-04-2013, 07:52 PM
Junior Member
Join Date: Nov 2011
Location: Garage
Car: 328i
Posts: 10
Thanks: 77
Thanked 1 Time in 1 Post

verify the throttle valve
Reply With Quote

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
Do I need to code to multiple modules? Retrax BMW GT1, OPS/OPPS, INPA 2 06-03-2013 04:02 AM
BMW error codes Admin BMW diagnostics and repair 6 03-16-2013 09:41 AM
help with codes hippee0 BMW GT1, OPS/OPPS, INPA 0 12-07-2012 10:45 PM
FSC codes generator Admin BMW ISIS, ICOM A+B+C, Esys 8 12-28-2011 05:03 PM
IBAC Codes sh0ckc0re BMW ISIS, ICOM A+B+C, Esys 2 12-14-2011 02:40 PM

All times are GMT. The time now is 01:48 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.1
BMW forum: diagnostics, coding, programming.