BMW ICOM NEXT | BMW NBT EVO FSC Codes | BMW NBT & CIC FSC Codes | BMW Rheingold , ISTA/P, KSD, ETK remote installation | BMW STANDARD TOOLS remote installation | BMW ESYS remote installation
Go Back   BMW forum. Diagnostics, coding, programming, repair BMW vehicles. > BMWelcome > BMW diagnostics and repair

Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 09-14-2016, 01:37 PM
Junior Member
 
Join Date: Jun 2014
Location: UK
Car: Mini cooper R56
Posts: 6
Thanks: 0
Thanked 0 Times in 0 Posts
Default Help with 2002 x5 ista d/p

Hi i'm having problems getting my 2002 x5 to connect to ista d and p i have the latest versions when i go to vehicle ident nothing comes up and i get an error, the car is connected with a k+d can cable INPA connects to the car ok and my wifes 2007 e87 1 series connects to ista with no problems using the same cable and software configuration am i missing something....


Reply With Quote
  #2  
Old 10-06-2016, 06:39 AM
Junior Member
 
Join Date: Sep 2016
Location: Toronto, Canada
Car: 2003 x5 4.4L
Posts: 1
Thanks: 0
Thanked 0 Times in 0 Posts
Default

hi there, its my first post!

In my case i was pulling my hair out as you most likely are trying to figure it all out.

i soldered pins 7+8 on the interface as our vehicles require it. Inpa would detect battery and ignition and even could look at engine values and yada yada...

long story short to end my 2 weeks of insanity and obsession. i simply bought a new cable and all was well.

If you have a cable with a white circuit board that may very be your issue like me. Purchasing one with the green circuit board did the trick

if you google white circuit board k can on google you will see posts about this very subject.

this is on my 2003 4.4.. with the 2002 im no expert but take a look under the hood to be sure you dont have an "ADS" connector as you'll be wanting to connect through that instead. As long as ediabas is setup correctly and in my case using version 7.3 worked for me you should be good to go. rheingold will pick it up quickly.

on a side note try using the K+D can utility, perhaps that may have been part of my sucess.. best of luck!
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
BMW E46 330i (2002+) Parking Light Delete e46330i BMW Programmers 2 04-20-2014 07:29 AM
BMW X5 E53 4.6is 2002, HW25 SW21 S.T.A.L.K.E.R BMW diagnostics and repair 0 11-21-2013 01:59 PM
Cannot to connect to e46 320d year 2002 funci BMW diagnostics and repair 2 10-06-2013 09:09 AM
2002 Z3 crash data removal zcarcanuck BMW Programmers 1 01-14-2013 04:19 PM
inpa e46 m3 2002 cant connect to smg module to do the adaptionn jeza BMW GT1, OPS/OPPS, INPA 0 01-11-2013 11:19 PM


All times are GMT. The time now is 04:45 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.1
BMW forum: diagnostics, coding, programming.