BMW ICOM NEXT | BMW NBT EVO FSC Codes | BMW NBT & CIC FSC Codes | BMW Rheingold , ISTA/P, KSD, ETK remote installation | BMW STANDARD TOOLS remote installation | BMW ESYS remote installation
Go Back   BMW forum. Diagnostics, coding, programming, repair BMW vehicles. > BMWelcome > BMW diagnostics and repair

Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 08-04-2017, 10:28 PM
Junior Member
 
Join Date: Aug 2017
Location: London
Car: BMW
Posts: 1
Thanks: 0
Thanked 0 Times in 0 Posts
Default Rheingold ISTA+ E46 The Vehicle could not be identified but E92 ok!

Hi,
I have Rheingold ISTA-D 4.05.32 running perfectly on my 2007 E92 330i, but when I connect it to my 2000 E46 330ci, I get:
"The vehicle could not be identified. Please check the access to the vehicle and check whether the testing-analysis-diagnosis has been activated."

I'm using the same cable (K+DCAN) for both cars. I have EDIABAS 7.3.0 installed, COM9. Ignition is turned on when running Operations > Read Out Vehicle Data > Complete identification.

INPA works fine on the E46 with same cable, although I swap the cable to use COM1 for INPA.


Reply With Quote
  #2  
Old 08-06-2017, 07:30 PM
Junior Member
 
Join Date: Jun 2017
Location: United States
Car: BMW E46 325xi
Posts: 2
Thanks: 0
Thanked 0 Times in 0 Posts
Default Rheingold ISTA+ E46 The Vehicle could not be identified but E92 ok!

I think you need connect together the 7&8pin on the cable. Im not sure about witch pins look after. When you using the e92 then you need disconnecting this pins


Sent from my iPhone using Tapatalk

Last edited by ExZsolti; 08-06-2017 at 07:50 PM.
Reply With Quote
Reply

Tags
ista/d, ista+, rheingold

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
BMW ISTA/D Rheingold v3.43.50 (EN, DE, RU, CN) tukanx BMW ISIS, ICOM A+B+C, Esys 64 08-26-2018 07:13 PM
Rheingold 4.04.12 / SDP 4.04.11 / ISTA-P 3.61 dconer BMW coding and programming 3 06-26-2017 08:52 PM
"Unable to identify vehicle" error on Rheingold ISTA D muratyilmaz BMW ISIS, ICOM A+B+C, Esys 0 06-01-2017 10:48 AM
BMW ISTA-D Rheingold 3.44.30 Standalone (EN, DE, CN, RU) tukanx BMW ISIS, ICOM A+B+C, Esys 17 03-09-2017 04:52 PM
BMW ISTA/D Rheingold 3.42.40 rus5 BMW ISIS, ICOM A+B+C, Esys 9 05-27-2014 05:21 PM


All times are GMT. The time now is 12:21 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.1
BMW forum: diagnostics, coding, programming.