BMW ICOM NEXT | BMW NBT EVO FSC Codes | BMW NBT & CIC FSC Codes | BMW Rheingold , ISTA/P, KSD, ETK remote installation | BMW STANDARD TOOLS remote installation | BMW ESYS remote installation
Go Back   BMW forum. Diagnostics, coding, programming, repair BMW vehicles. > BMWelcome > BMW coding and programming > BMW GT1, OPS/OPPS, INPA

Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 08-26-2015, 08:40 PM
Junior Member
 
Join Date: Aug 2015
Location: Sweden
Car: BMW 523i
Posts: 4
Thanks: 0
Thanked 0 Times in 0 Posts
Default Bmw e39 523i DME-EWS Sync every week problem

Hi there! I'm from Sweden and I have a tricky question for u guys! (sorry for bad English)

I have a problem with my car, will try to make my story here short.

I have had some problems with my BMW for a while and lost my hope.

Once every week my car wont start, The car cranks but it wont start.

I have I got myself a program called INPA and BMW Scanner and tried to read the vehicle's fault codes with them and come to the following:




80 [128] DME-EWS Interface

D1 [209] Anti-tempering protection EWS




When I make a synchronization between the DME-EWS, The car works another week.

I left my car here in Sweden at the BMW workshop and they say that is probably the DME that must be replaced and that it costs about 30: 000 and they can not guarantee that it is error.

That said, I've Googled as a guru and come to any conclusions:

1: Could it be the crankshaft sensor (I have changed the Camshaftsensor) that haunts? But then maybye the car wont start when I make synchronization?

2: Can there be the sync between the keys / ring to the EWS? But then the programs should find error codes that indicate that the keys are not sync?

3: Install new software? I have read on a forum ( [Only for registered users... ]) ) that there is a hardware failure and its needed to reprogram the car's DME.

Or can i buy an old DME and with some help from u guys (i will pay money) flash it to a "new" DME and sync it with the EWS?

Please help me before my hair turns grey :)

Last edited by bubbenboy_90; 08-28-2015 at 05:15 PM.


Reply With Quote
  #2  
Old 09-04-2015, 07:46 AM
Junior Member
 
Join Date: May 2015
Location: Malaysia
Car: BMW E39 523i 1997
Posts: 1
Thanks: 0
Thanked 0 Times in 0 Posts
Default

Inpa & BMW scanner will not work for the syncing of EWS-DME.

You must only use GT1 to do the syncing. It works all the time!!

Goodluck!
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
BMW 523i E60 LCI N53 cfm228 BMW diagnostics and repair 0 05-04-2015 09:24 AM
INPA to sync EWS on 09 E91 V8OW BMW GT1, OPS/OPPS, INPA 0 01-18-2015 12:09 AM


All times are GMT. The time now is 03:23 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.1
BMW forum: diagnostics, coding, programming.