BMW ICOM NEXT | BMW NBT EVO FSC Codes | BMW NBT & CIC FSC Codes | BMW Rheingold , ISTA/P, KSD, ETK remote installation | BMW STANDARD TOOLS remote installation | BMW ESYS remote installation
Go Back   BMW forum. Diagnostics, coding, programming, repair BMW vehicles. > BMWelcome > BMW coding and programming > BMW GT1, OPS/OPPS, INPA

Like Tree1Likes
Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 11-07-2010, 01:28 PM
Administrator
 
Join Date: Nov 2010
Posts: 402
Thanks: 14
Thanked 2,839 Times in 268 Posts
Default BMW GT1 Group Tester One





BMW group tester one (GT1) is offered to the aftermarket in the same specification that is currently supplied to BMW franchised dealers. It is special-purpose tool of BMW Series.Gt1 is supplied with a Pentium based laptop PC on a Windows platform connected to a high specification communications and measurement interface.
GT1 can complete coverage of ALL BMW systems, one thing that can only be done using the GT1, this function is called Electronic Control Unit (ECU) programming and configuration. Many of the original electronic systems on modern vehicles can now be re programmed using software; historically any changes to rectify software problems would involve a new ECU which would be purchased from the parts department and that is the only way that the independent market today is able to overcome these problems. The BMW GT1 system allows you re programme all BMW car ECU’s to fix software or to install a blank ECU to a repaired vehicle. GT1 is the only system that allows you to do this and is absolutely essential if working on Freelander , the GT1 is also the only system that provides all diagnostics and programming for the very latest BMW launched this year.
BMW GT1 software kit comprises of five system ,TIS system .DIS data system ; diagnosis system .measuring system and manangement system . you can to test and check data information same time in GT1.

Test function :
Read faulty code ,clear faulty code ,data stream .activate state,programming ,component test ,maintenance data information ,components location ,wiring diagram etc...,TIS AND DIS ARE SUPPLY all of system diagram of all of BMW car, Components location, maintainence method and coding information etc. Can do completely of BMW car system.
1. GT1-SCAN Pro mainbody
2. Network cable
3. GT1 for vehicles with 20pin diagnostic connector
4. GT1 for vehicles with OBII diagnostic connector
5. Latest diagnostic version of software(two HDD)
Package List:
(1)GT1 Yellow Multiplexer (DK2.1)
(2)16 pin OBD-II cable,
(3)20 pin diagnostic cable,
(4)LAN cable,
(5)DIS Software HDD V43.0,,v57.0(optional)work with IBM T30 laptop (optional),
(6)SSS software HDD V32.0 work with IBM T30 laptop (optional).

GT1 with DIS for diagnosis Supported Models:
Vehicle interface via OBD-II or 20 pin socket:

E87, E90, E91, E92, E60, E61, E63, E64, E65, E66, E70, E83, E85, E86, E31, E32, E34, E36, E38, E39, E46, E52, E53, R56, R50, R52, R53

GT1 with SSS for programming Supported Models:
Vehicle interface via OBD-II or 20 pin socket:
E83, E85, E86, E31, E32, E34, E36, E38, E39, E46, E52, E53, R56, R50, R52, R53

Language Available:
English,Chinese,spanish(V50),Russian,German


Software:


BMW DIS v57 RUS VmWare (already installed on 52 base)
Part 1: http://depositfiles.com/files/4f0fvcffd ,
Part 2: http://depositfiles.com/files/5i3tg8icc
Password of renewal - 12345

BMW Progman v32
Download тут.


Reply With Quote
The Following 5 Users Say Thank You to Admin For This Useful Post:
bacil (04-10-2014), bartenos (02-03-2013), bili316i (03-17-2013), green_duck (12-30-2016), midnitetuning (04-16-2015)
  #2  
Old 11-22-2010, 09:44 AM
Administrator
 
Join Date: Nov 2010
Posts: 402
Thanks: 14
Thanked 2,839 Times in 268 Posts
Default

  • BMW Diagnosis with GT1. 29 pages. Language - English.
After completion of this module you will be able to:
• Start a diagnostic session with the DISplus or GT1.
• Understand how to use the embedded measuring system used in the test plans.
• Look up wiring schematics.
• Correctly print out a wiring schematic from the diagnostic program.

Contents:

BMWDiagnosis . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Diagnostic Head Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Staring Diagnosis . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Vehicle Identification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Fault Symptom Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
Test Plan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
Test Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
Measurement System Integration . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
End of Diagnosis . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
Canceling a Session . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
Break - Pausing/Interrupting a Session . . . . . . . . . . . . . . . . . . . . . . . .15
Quitting a Session . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
“Expert Mode” Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17
Control Unit Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18
Service Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19

Electrical Troubleshooting Manuals and Schematics . . . . . . . . . . .20
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
Components of an ETM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20
Circuit Symbols . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21
ETM Symbols . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21
Schematics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24
General Guidelines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24
Working with Schematics in the Diagnosis Program . . . . . . . . . . . . .26
Printing a Schematic from the Diagnosis Program . . . . . . . . . . . . . .28
Print Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28
Print Document . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29
Document Abbreviations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29

Download - here.
Reply With Quote
  #3  
Old 11-22-2010, 09:45 AM
Administrator
 
Join Date: Nov 2010
Posts: 402
Thanks: 14
Thanked 2,839 Times in 268 Posts
Default

  • Native Installation of GT1 on a IBM Thinkpad with screenshots. 6 pages. Language - English.
Download - here.
Reply With Quote
  #4  
Old 11-22-2010, 09:49 AM
Administrator
 
Join Date: Nov 2010
Posts: 402
Thanks: 14
Thanked 2,839 Times in 268 Posts
Default

  • BMW SIP. BMW Service Training. Working with GT1 (video training).
Download - here or here.
Reply With Quote
  #5  
Old 11-22-2010, 09:50 AM
Administrator
 
Join Date: Nov 2010
Posts: 402
Thanks: 14
Thanked 2,839 Times in 268 Posts
Default

  • BMW GT1 cable pinouts.
See here.
Reply With Quote
  #6  
Old 11-22-2010, 09:53 AM
Administrator
 
Join Date: Nov 2010
Posts: 402
Thanks: 14
Thanked 2,839 Times in 268 Posts
Default

  • Installing Printer in GT1 using VMWare. Description + utils. 6 pages. Language - English.
Download - here.
Reply With Quote
  #7  
Old 11-22-2010, 09:56 AM
Administrator
 
Join Date: Nov 2010
Posts: 402
Thanks: 14
Thanked 2,839 Times in 268 Posts
Default

  • SSS Base Installation Guide using VmWare. With screenshots. Language - English.
You need:
Vmware 6.0 (Recommended)
SSS Base 3.1
Progman 2.72
Modified Hwver.dll


Download - here.
Reply With Quote
  #8  
Old 11-22-2010, 09:58 AM
Administrator
 
Join Date: Nov 2010
Posts: 402
Thanks: 14
Thanked 2,839 Times in 268 Posts
Default

  • DISplus, GT1 (Group Tester One) and Software Service Station (SSS). Installation and operating instructions. 56 pages. Language - English.

Contents:



Download - here.
Reply With Quote
The Following 2 Users Say Thank You to Admin For This Useful Post:
neilrmp (01-02-2013), rabihfiras (11-02-2011)
  #9  
Old 12-14-2010, 01:40 PM
Administrator
 
Join Date: Nov 2010
Posts: 402
Thanks: 14
Thanked 2,839 Times in 268 Posts
Default

This article will walk you through setting up a VMWare virtual machine and installing the GT1 Base v39 on it.

Install VMWare workstation. From the Windows Start menu, start the VMWare Manage Virtual Networks. Tab to 'Host Virtual Adapters' and make sure VMNet1 is enabled.



Tab to 'Host Virtual Network Mapping' click the > next to VMNet1 and set the IP address to 192.168.68.0, Mask to 255.255.255.0.





Apply changes and go to Windows Network Connections. VMNet1 should be turned on and have an IP address of 192.168.68.1. This is the IP address of your Windows host on the virtual network.

Open VMWare workstation. Pick File, New, Virtual Machine. Pick a Custom configuration. If you are asked about a virtual machine format, don't pick Legacy. Then, it will ask you to select a virtual operating system. Pick Other, Other.



Now name your VM and pick a location for it. I do not like the default location.



Select One processor. Allocate 256MB of RAM. It can be as low as 240MB.



For network connection, pick Use host-only.



If you get asked about SCSI adapter, pick the BusLogic.



Choose to create a new virtual disk.



Choose IDE as the disk type. The magic number is 18.635. It is extremely important that you check the Allocate all disk space now box.





Go have lunch!




When this finishes your new VM will appear in VMware. It's not ready yet. Go to Edit virtual machine settings.

Remove Audio.

For the Ethernet interface, pick Custom network, VMNet1.

Add two more Ethernet interfaces, pick Custom network, VMNet1.




Change the CDROM to whichever DVD drive you will be using. If you will be using Daemon Tools to mount the DVD's, pick the drive letter that Daemon Tools is using.




Go to Options, pick Guest Isolation, disable the drag/copy. Press OK.


Mount the GT1 Base V39 CD and start the VM.

It will boot, do something small, and then reboot. It has to boot again from the CD. So, when you see the VMWare BIOS, hit ESC and choose to boot from CD.

It will boot again, make filesystems, and install some files. It will beep some when it's finished. Unmount the CD and shut off the VM.


You now have the GT1 base installed on the system. Now it's time to change the root password. My method will detail using the SCO Openserver 5.0.7 boot CD to pull this off.

Mount the SCO CD and start the VM. Remember to press ESC to choose to boot from CD. Press Enter at the Boot: line. It will boot then ask you to press Enter to begin the installation. Accept the license and it will ask which CD to install from. Just take the defaults.

When you see the keyboard selection menu, press [Alt][F3]. The screen will change to all black and a prompt <Installation>.

At this prompt type

cd /hdFS/var/opt/K/SCO/Unix/*/etc

then

/hdFS/opt/K/SCO/Unix/*/bin/ed shadow

Type these lines:

P (turns on a * prompt)
1 (the root line will be displayed)
1,1c (this is a command to change line 1)
root::11628:0:0 [Enter] [Control-D](When you press ^D the * will appear)
w
q

[In my screenshot the edit has already been done, some of the output is a little different to what you'll see.]



Stop the VM and reboot it.

GT1 will boot up and ask you to calibrate the touchscreen or select a language. We must configure some things first, however.

Press [Ctrl][SysRq] to leave the graphical interface. You will get a login prompt. Login as root. It will ask you to pick a password.

When you see the # prompt, change the passwords for some of the important users:

# passwd dis
# passwd admin

You must make a small change so the mouse will not die later:

# vi /etc/default/boot

Arrow down to the line that starts with DEFBOOTSTR=, press capital A and add:

kbm.wheel=no
[ESC]:wq![Enter]



Now back at the # prompt, type

# mkdev bitpad

Pick #3 to remove, pick #1, then pick #6 to remove drivers, answer yes to remove the devices, and then yes to the next three y/n questions. Then quit.

Now back at the # prompt, type

# scoadmin network



Remove the three network devices (keep the loopback driver.)



Now Add network adapter. You will see three AMD PCNet-PCI adapters listed. Pick one, then pick TCP/IP. Give it an address of 192.168.68.30. Go to the end of the form and OK it. Repeat this twice, adding the other two network adapters, give them host names of gt1ap1 and gt1ap2, and IP address 192.168.68.31, 192.168.68.32.



Exit the network panel, Yes create a new kernel, and Yes to the next 3 questions.

Now type

# scoadmin video

Make sure the video is configured to VESA like in my screenshot. If not, remove it and recreate it.



Now type

# mkdev mouse

Pick #2, add a mouse. Pick #3, PS/2 keyboard mouse. Pick #3, High resolution. Press enter at the next prompt. The next question asks about other terminals, tell it no. Yes, relink the kernel, yes, yes, yes. Q to quit.

Back at the # prompt, let's reboot.

# init 6

GT1 should reboot and present with a language selection.

Enter dealer number 12345 if you are not familiar with DIS. This is the password to install the other GT1 applications later.


Oops, I added an extra digit.

Now you can go into Administration and add the progman, updates, whatever.
ArnoNym likes this.
Reply With Quote
  #10  
Old 12-14-2010, 01:40 PM
Administrator
 
Join Date: Nov 2010
Posts: 402
Thanks: 14
Thanked 2,839 Times in 268 Posts
Default

BMW DIS Installation / GT1 installation instructions -
http://dis.robmw.altervista.org/dis/index.htm

Reply With Quote
Reply

Tags
bmw group tester 1, bmw gt1

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On



All times are GMT. The time now is 11:19 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.1
BMW forum: diagnostics, coding, programming.