Bmw INPA Ediabas, NCS Expert tool, WinKFP

[Admin]

BMW INPA Engineer diagnostic equipment has the powerful function which can do diagnosing of both latest and old BMW serials car, such as E39, E60, E65, and the communication speed much faster than GT-1. It only needs 6 seconds to scan out all trouble codes of the car which has CANBUS gateway communication, such as E60,E65, and 5 seconds for old car coding, such as E39.



New INPA description：
* Support of all ECU use cases in Engineering, Test, Production and After Sales
* Specification of ECU’s diagnostic data
* Reading and clearing error memory
* FLASH data uploading and downloading
* Reading measurement value
* Input/output control
* Calibration of single ECU variables
* CAN (controller Area Network) bus mode emulation
* Integrated solutions for on-board/off-board
* Customer specific protocols supported
* Long term application by supporting widespread ASAM standards
* Language option: English and German

Models covered:
1 series E81 E82 E87 E88
3 series E30 E36 E46 E90 E91 E92 E93
5 series E34 E39 E60 E61
6 series E63 E64
7 series E38 E65 E66
8 series E31
Mini R50 R52 R53 R55 R56 R57
X series E53 E83 E70 E71
Rolls Royce RR1 RR2
Z series E52. E85 E86 E89
F01/L6


Accessories：
BMW INPA cable (3 variants: ADS+K-kine / K-line / K-line+DCAN) x 1pc
Software hardisk (v5.02 ) with installation instruclions x 1pc

Notice of using INPA：

1） Before using this equipment, keep the battery of notebook fully charged to avoid battery broken. Don’t charge the battery while diagnosing (the charger may interfere with diagnosis). Before charging, discharge the battery. You may knock down the battery and connect the power line during long time diagnosing. To make sure the battery life. 2） While testing, make sure the diagnostic lines well connected.
3） Be sure to start diagnosing after all icons on bottom right of screen displayed regularly.
4） After finished diagnosing, back the screen to the main interface, then shut down the key and pull out the connector.
5） Don’t cut the power or connector during test.
Don't touch the high temperature components in carriage during test.

Software:
BMW INPA EDIABAS 5.0.2 (full package, including: INPA, NCSExpert, WinKFP, Tool32).
Language: English/German
System requirements:
Win XP/2000/VISTA/7

If you have Win7 operating system INPA will work properly but you need XPmode to work with NCSExpert.

Download here. (enter digits and click "Скачать").

Step-by-step installation guide with screenshots here: http://bmwcoders.com/forum/bmw-gt1-o...-software-328/

______________

If your INPA Cable connects to USB port and have ftdi chip you can download latest version of drivers here: http://www.ftdichip.com/Drivers/VCP.htm

[Admin]

• NCS Dummy (small utility to make work with NCSExpert more easy).

+ NCS Dummy user manual.

[Admin]

• BMW INPA User manual. 14pages. Language: English.

Contents:
General information about INPA
Configuration
File Structure
End principle
Language Elements (Custom Functions, Imported functions)

[Admin]

• INPA Interpreter for test procedures. User documentation.Authors: Georg Luderböck, Michael Koch, Roland Stadtmüller. Date: 20.07.2000

Contents:

1 INTRODUCTION .................................................. .................................................. ............................. 2
1.1 Table of contents.......................................... .................................................. ....................... 3

2 OVERVIEW.......................................... .................................................. .............................................. 5
2.1 Release status............................................ .................................................. .......................... 6

3 SYSTEM DESCRIPTION....................................... .................................................. ............................ 8

4 INSTALLATION AND CONFIGURATION..................................... .................................................. ... 11
4.1 Installation...................................... .................................................. ................................... 11
4.1.1 Requirements for operating the interpreter .................................................. ............ 11
4.1.2 Files after installation...................................... .................................................. ........ 11
4.1.3 To set up the interpreter .................................................. ......................................... 12
4.2 Configuration .................................................. .................................................. ................... 13
4.2.1 General program configuration..................................... ............................................ 13
4.2.2 Structured script selection .................................................. ...................................... 15
4.2.3 Error mask-out files .................................................. ................................................ 17
4.2.3.1 General........................................... .................................................. ........... 17
4.2.3.2 Format and content .................................................. ................................... 17
4.2.3.3 Processing in INPA .................................................. ................................... 20
4.2.3.4 Example .................................................. .................................................. .. 21
4.2.3.5 Example AAB.FAB........................................... ........................................ 23
4.2.4 Command line options........................................... .................................................. . 25

5 TEST PROCEDURE DESCRIPTION FILES............................................. ......................................... 26
5.1 File structure .................................................. .................................................. .................... 26
5.1.1 Pragmas .................................................. .................................................. ............... 26
5.1.2 Includes .................................................. .................................................. ................ 27
5.1.3 Imported functions......................................... .................................................. ......... 27
5.1.4 External function declarations .................................................. ................................ 28
5.1.5 Global data definitions .................................................. ............................................ 28
5.1.6 test procedure description .................................................. ...................................... 28
5.2 Procedure principle for tests............................................. ................................................. 29
5.3 Language elements .................................................. .................................................. ......... 30
5.3.1 User-defined functions .................................................. ........................................... 31
5.3.2 Imported functions......................................... .................................................. ......... 31
5.3.3 Screen display........................................... .................................................. ............. 34
5.3.4 Menu control........................................... .................................................. ................ 36
5.3.5 State machines.......................................... .................................................. ............. 36
5.3.6 Logic tables .................................................. .................................................. .......... 38
5.3.7 Control structures .................................................. .................................................. . 39
5.3.8 Functions of the standard library .................................................. ............................ 41

6 SOFTWARE STRUCTURE .................................................. .................................................. ............ 56
6.1 Parser............................................ .................................................. ..................................... 57
6.2 Data administration .................................................. .................................................. ......... 58
6.3 Object administration.................................... .................................................. .................... 58
6.4 Interpreter....................................... .................................................. ................................... 58
6.5 Library functions and external DLL’s .................................................. .............................. 59
6.6 INPA localisation support-DLL’s............................................. ........................................... 59
6.7 Development tools used .................................................. .................................................. . 59

7 APPENDIX A LANGUAGE DEFINITION .................................................. ......................................... 60

8 APPENDIX B EXAMPLE OF A TEST PROCEDURE DESCRIPTION .............................................. 67

[Admin]

• NCS Expert Tool documentation. 15 pages. Language - English.

The document describes the installation, configuration and operation of the NCS Expert tool

[Admin]

• BMW Expert Tools: Coding Control Units with NCS Expert. 8 pages. Illustrated instruction.

[Admin]

• NFS - New Flash System. System Documentation. 60 pages. Language - English.

Contents:
1 Overview.......................................... .................................................. ...5
1.1 Function Overview.......................................... .................................................5
1.2 CASCADE Operation......................................... .............................................5
1.3 NFS Operating Modes............................................. ........................................5
1.3.1 Normal Flow (Pre-Series Vehicles)......................................... ....................................5
1.3.2 ZB_CHECK.......................................... .................................................. .....................7
1.3.3 Trailer Operation......................................... .................................................. ..............7
1.3.4 HO Mode.............................................. .................................................. ......................7
1.3.5 Emergency Flashing.......................................... .................................................. ........7
1.3.6 Sample............................................ .................................................. ............................7
1.4 Multi-Channel Operation......................................... .......................................7
1.5 Multi Instance Operation......................................... .......................................8
1.6 Requirements...................................... .................................................. ............8

2 Installation...................................... .................................................. ....8
2.1 Installation from the GIS Server............................................ ........................8
2.2 Individualization................................. .................................................. ...........8
2.3 Documentation and Online Help.............................................. ......................9
2.4 Questions and Answers........................................... .........................................9
2.5 Contact Persons........................................... .................................................. ...9

3 Command Line.............................................. .....................................10
3.1 Call-up from CASCADE........................................... ....................................10

4 Operation......................................... .................................................. .11
4.1 Main Window............................................ .................................................. ...11
4.1.1 Elements of the Main Window............................................ .....................................11
4.1.2 Traffic Light............................................. .................................................. ................13
4.1.3 Signal Lights............................................ .................................................. .................13
4.1.4 Operating Elements for Process Control........................................... ......................14
4.1.5 File Menu.............................................. .................................................. ....................14
4.1.6 Menu Extras............................................ .................................................. .................15
4.1.7 Emergency Flashing Menu.............................................. .........................................18
4.1.8 Configuration Menu.............................................. .................................................. ..18
4.1.9 TestMode Menu.............................................. .................................................. .........18
4.1.10 Help Menu.............................................. .................................................. ..................20
4.2 Additional Windows........................................... ............................................20
4.2.1 Display Window............................................ .................................................. ...........21
4.2.2 Selection Window............................................ .................................................. .........22
4.2.3 Message Dialog............................................ .................................................. .............23
4.2.4 Configuration dialog for trailermode....................................... ................................23

5 Program Flow.............................................. .......................................27
5.1 Rough Flow.............................................. .................................................. .....27
5.2 Partial Flow: Normal Flow.............................................. ..............................28
5.2.1 Detailed Flow – Determining Vehicle Data (Flash)........................................... .....29
5.2.2 Detailed Flow - Flashing.......................................... .................................................. 30
5.3 Partial Flow: CASCADE Run............................................... .......................31
5.4 Partial Flow: Emergency Flashing.......................................... .....................32

6 Logging (Trace)........................................... .......................................33
6.1 Programming Diary............................................. ..........................................33
6.2 Current Vehicle........................................... .................................................. .34
6.3 Programmable ZB Numbers........................................... ..............................38
6.4 Vehicle Orders............................................ .................................................. ..39
6.5 ID Data.............................................. .................................................. ............40
6.6 KMM Modification Plans............................................. .................................41
6.7 KMM Backup Modification Plans............................................. ...................42
6.8 Error Log............................................... .................................................. .......42

7 Configuration Files............................................. ...............................44
7.1 ANLAGE.INI........................................ .................................................. ........44
7.2 NFS.INI........................................... .................................................. ..............44
7.3 Multi Instance and Multi-Channel........................................... ....................50
7.3.1 Only One Instance.......................................... .................................................. .........50
7.3.2 Several Instances......................................... .................................................. .............51
7.3.3 Multi-Channel Operation......................................... .................................................5 1
7.3.4 Sample Configuration OBD.INI........................................... ....................................52
7.3.5 Sample Configuration REMOTE.INI........................................ ..............................52

8 Interfaces........................................ .................................................. ..53
8.1 CASCADE........................................... .................................................. .........53
8.2 EDIABAS........................................... .................................................. ...........54
8.3 Configuration Management (KMM)............................................. ...............54
8.4 WinKFP............................................ .................................................. ............54
8.5 Signal Lights............................................ .................................................. .....56
8.6 ECU SGBDs............................................. .................................................. .....57

9 Abbreviations and Glossary.......................................... ....................59

[Admin]

• EDIABAS - USER MANUAL + INSTALLATION GUIDE. 59 pages. Language - English.

This manual describes how to operate the EDIABAS (Electronic Diagnostic Basic System).

Contents:

Contents.......................................... .................................................. ..............2

1. Revision history........................................... ..........................................5

2. Introduction...................................... .................................................. ....6
2.1. About this manual............................................ ................................6
2.2. Notational conventions....................................... .............................6
2.3. Special features, terms, acronyms.......................................... .........7
2.4. Trademarks........................................ .............................................7

3. General........................................... .................................................. .......8
3.1. Diagnostics and coding of ECUs.............................................. .......8
3.2. Problem definition........................................ ....................................8
3.3. Approaches to problem solving........................................... .............10
3.4. Implementing solutions with EDIABAS........................................... .12
3.5. Structure......................................... .................................................1 2
3.6. Job concept........................................... ..........................................15
3.7. Description language BEST.............................................. ...............15
3.8. Sequences......................................... ..............................................16
3.9. Availability...................................... .................................................. 19

4. Installation and administration.................................... .........................20
4.1. Delivery packages.......................................... .................................20
4.1.1. Delivery package RUNTIME SYSTEM................................20
4.1.1.1. Files for WIN32............................................. ............20
4.1.1.2. Files for WIN16............................................. ............22
4.1.1.3. Files for WINCE............................................. ...........22
4.1.1.4. Files for SCO-UNIX.............................................. ....23
4.1.1.5. Files for QNX............................................... .............23
4.1.1.6. Documentation..................................... ....................24
4.1.2. Delivery package APPLICATION DEVELOPMENT KIT.....24
4.1.2.1. Files for WIN32............................................. ............25 2
4.1.2.2. Files for WIN16............................................. ............25
4.1.2.3. Dateien unter WINCE............................................. ..25
4.1.2.4. Files for SCO-UNIX.............................................. ....27
4.1.2.5. Files for QNX............................................... .............28
4.1.2.6. Documentation..................................... ....................29
4.1.3. Delivery package BEST DEVELOPMENT KIT....................29
4.1.3.1. Files for WIN32............................................. ............30
4.1.3.2. Files for WIN16............................................. ............31
4.1.3.3. Documentation..................................... ....................31
4.2. System requirements...................................... .................................32
4.2.1. MS-WINDOWS........................................... ........................32
4.2.2. MS-WINDOWS CE................................................ .............32
4.2.3. SCO-UNIX.............................................. ............................32
4.2.4. QNX............................................... .....................................32
4.3. Installing for the first time.............................................. ...................33
4.3.1. MS-WINDOWS........................................... ........................33
4.3.2. SCO-UNIX.............................................. ............................33
4.3.3. QNX............................................... .....................................34
4.4. EDIABAS program paths............................................. ....................35
4.4.1. MS-WINDOWS........................................... ........................35
4.4.2. SCO-UNIX.............................................. ............................35
4.4.3. QNX............................................... .....................................35
4.5. EDIABAS configuration..................................... ...............................36
4.5.1. Search sequence of EDIABAS.INI......................................3 6
4.5.2. Configuration overview.......................................... ..............37
4.5.3. Select the hardware interface......................................... ....39
4.5.4. MS-WINDOWS........................................... ........................39
4.5.5. SCO-UNIX.............................................. ............................40
4.5.6. QNX............................................... .....................................40
4.5.7. Directory of ECU description files.......................................40
4.5.8. Character Set Conversion........................................ ...........40 3
4.5.9. WIN16/32-Umsetzung......................................... ................41
4.6. Start and terminate EDIABAS........................................... ...............41
4.6.1. WIN32............................................. ....................................42
4.6.2. WIN16............................................. ....................................42
4.6.3. WINCE............................................. ...................................42
4.6.4. SCO-UNIX.............................................. ............................42
4.6.5. QNX............................................... .....................................43
4.7. Un-install........................................... ...............................................43
4.7.1. MS-WINDOWS........................................... ........................43
4.7.2. MS-Windows CE................................................ .................44
4.7.3. SCO-UNIX.............................................. ............................44
4.7.4. QNX............................................... .....................................44
4.8. Protection mechanism......................................... ............................45
4.9. Remote diagnostics....................................... ..................................46
4.9.1. EDIABAS.INI on the local PC..............................................46
4.9.2. EDIABAS.INI on the remote-controlled PC.........................48
4.9.3. Procedure for remote diagnostics....................................... 48
4.10. EDIABAS Parallel Operation......................................... ...................48

5. Help programs.......................................... ..............................................50
5.1. UINSTALL.......................................... .............................................50
5.1.1. SCO-UNIX.............................................. ............................50
5.1.2. QNX............................................... .....................................50
5.2. PE (Password Editor)........................................... ...........................51
5.3. DEVCLOSE.......................................... ...........................................52
5.4. BESTINFO.......................................... .............................................52
5.5. BESTVER........................................... .............................................54
5.6. XTRACT............................................ ..............................................55
5.7. STRIP............................................. .................................................5 7

A.GLOSSARY........................................ .................................................. ...58

[Admin]

• EDIABAS - TRANSPARENT MODE. INTERFACE DESCRIPTION. 27 pages. Language - English.

This manual describes the interface of the EDIABAS transparent mode. It has been written for use by developers of diagnostic software who work with the API interface, and is based on the API Interface Description [1] and the EIDBSS documentation [2]. API functions and interface functions are only detailed so far as is necessary for an understanding of the transparent mode. The emphasis is on descriptions of the individual TMODE functions. These functions are the jobs provided by the special description file for the transparent mode with the name "TMODE". You will find general information about EDIABAS and control unit description files in Reference [4].

Contents:

1. UPDATE HISTORY 5

2. INTRODUCTION 6
2.1. About this Manual 6
2.2. Conventions 7
2.3. Special features, definitions, acronyms 7

3. GENERAL 8

4. THE PROGRAMMING INTERFACE 9
4.1. The API functions apiJobData/apiJobExt 9
4.2. The API function apiResultBinary 12
4.3. Application example 12

5. THE TMODE FUNCTIONS 15
5.1. Overview of all TMODE functions 16
5.2. INITIALISIERUNG 16 2
EDIABAS - TRANSPARENT MODE
5.3. SETZE_INTERFACE_ZURUECK 17
5.4. SETZE_SG_PARAM_ZURUECK 17
5.5. SETZE_SG_PARAMETER_ALLG 17
5.6. SETZE_SG_PARAMETER_EIDBSS 18
5.7. SETZE_ANTWORTLAENGE 18
5.8. HOLE_KEYBYTES 20
5.9. SENDE_TELEGRAMM 20
5.10. SENDE_TELEGR_WIEDERHOLT 21
5.11. HOLE_ANTWORT_TELEGR 21
5.12. STOPPE_WIEDERH_ANFORDERUNG 21
5.13. LESE_INTERFACE_TYP 22
5.14. LESE_INTERFACE_VERSION 22
5.15. LESE_SPANNUNG_KL30 22
5.16. LESE_SPANNUNG_KL15 23
5.17. LESE_PORT 23
5.18. SETZE_PORT 23 3
EDIABAS - TRANSPARENT MODE
5.19. SETZE_PROGRAMMIERSPANNUNG 24
5.20. SETZE_SIA_RELAIS 24
5.21. TESTE_DIAGNOSELEITUNG 25
5.22. HOLE_INTERFACE_STATUS 25
5.23. REICHE_AN_INTERFACE_DURCH 25
5.24. SETZE_TRAP_MASK_REGISTER 26
5.25. LIES_TRAP_MASK_REGISTER 26

A.LIST OF REFERENCES 27

[Admin]

• EDIABAS — ECU SIMULATOR. 23 pages. Language - English.

This manual describes how to use the ECU (Electronic Control Unit) Simulator integrated in EDIABAS. General information about EDIABAS and the ECU description files can be found in [1]

Contents:

1. Revision history........................................... ..........................................4

2. Introduction...................................... .................................................. ....5
2.1. About this manual............................................ ........................5
2.2. Notational conventions....................................... .....................5
2.3. Special features, terms, acronyms.......................................... 6

3. General........................................... .................................................. .......7

4. Overview.......................................... .................................................. .....8

5. Control........................................... .................................................. .......10
5.1. EDIABAS configurations for simulation...................................10
5.2. Interface simulation file.............................................. ..............10
5.3. ECU simulation file.............................................. ....................10

6. Error messages.......................................... ............................................11

7. Syntax and contents of the simulation files........................................12
7.1. Syntax............................................ .........................................12
7.2. Function blocks............................................ ...........................13
7.2.1. VERSION........................................... .............................14
7.2.2. POWERSUPPLY....................................... .....................14
7.2.3. IGNITION.......................................... ..............................15
7.2.4. PORT.............................................. ................................16
7.2.5. REQUEST........................................... ...........................16
7.2.6. RESPONSE.......................................... ..........................16
7.2.7. LOOPTEST.......................................... ...........................17
7.2.8. KEYBYTES.......................................... ...........................17

8. Simulation files............................................. ..........................................18
8.1. Interface simulation file.............................................. ..............18 2
EDIABAS — ECU SIMULATOR
8.2. ECU simulation file.............................................. ....................22

A. References........................................ .................................................. ....23