BMW ICOM NEXT | BMW NBT EVO FSC Codes | BMW NBT & CIC FSC Codes | BMW Rheingold , ISTA/P, KSD, ETK remote installation | BMW STANDARD TOOLS remote installation | BMW ESYS remote installation
Go Back   BMW forum. Diagnostics, coding, programming, repair BMW vehicles. > BMWelcome > BMW coding and programming > BMW GT1, OPS/OPPS, INPA

LinkBack Thread Tools Display Modes
Old 11-03-2013, 03:04 AM
Junior Member
Join Date: Nov 2013
Location: Alabama
Car: 97 m3
Posts: 6
Thanks: 0
Thanked 0 Times in 0 Posts
Post Cant connect to all control units in INPA with my 97 m3


I recently purchased this:

[Only for registered users... ].

They refuse to offer me any support because they say im paying for "just the cable" and the software is just included as a bonus therefore they cannot offer any support.....:(

I got the ADS adapter too as i was intending this to use with my 1/97 e36 m3. The issue is that I cant connect to certain modules even with the ADS interface. I can connect to DME, AIRBAG, but nothing else. (ABS/ASC, KOMBI, HVAC, EWS, ZKE, etc.) I get error "IFH-0006 Command Not Accepted" with attempting to connect to these modules.

Ive gotten a lot of mixed info from searching so I registered here hoping to get some correct information.

My laptop does not have serial and i'm running the cables thru USB. If I change INPA.INI config from interface type STD:USB to ADS it stops working completely and wont communicate to any module at all.

Can someone tell me what I need to do to get full access to all the modules? Do I seriously need to run this through a serial port to make this fully work? Some have mentioned some kind of mod to the ads cable by shorting 2 pins together?

All help is appreciated....thanks in advance.

Reply With Quote

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
IFH-0009 cannot connect AlexK BMW GT1, OPS/OPPS, INPA 14 09-16-2016 09:32 AM
Problem to connect e61 lci wheelie BMW GT1, OPS/OPPS, INPA 0 08-02-2013 11:01 PM
inpa e46 m3 2002 cant connect to smg module to do the adaptionn jeza BMW GT1, OPS/OPPS, INPA 0 01-11-2013 11:19 PM
How to connect DDE direct on INPA cable without car? Napalm BMW diagnostics and repair 1 08-12-2012 08:02 PM
Cant connect to engine ecu. pinch BMW coding and programming 2 03-16-2012 04:52 PM

All times are GMT. The time now is 11:22 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.1
BMW forum: diagnostics, coding, programming.