BMW ICOM NEXT | BMW NBT EVO FSC Codes | BMW NBT & CIC FSC Codes | BMW Rheingold , ISTA/P, KSD, ETK remote installation | BMW STANDARD TOOLS remote installation | BMW ESYS remote installation
Go Back   BMW forum. Diagnostics, coding, programming, repair BMW vehicles. > BMWelcome > BMW coding and programming > BMW GT1, OPS/OPPS, INPA

Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 07-09-2011, 11:38 AM
Junior Member
 
Join Date: Jul 2011
Location: ALGERIA
Car: E60
Posts: 16
Thanks: 4
Thanked 0 Times in 0 Posts
Default CAS 2 / 3 auto gear to manual

hello to all
pls can you show how to modife CAS2 /3 auto gear to manual gear
many thanks


Reply With Quote
  #2  
Old 07-10-2011, 09:39 AM
Junior Member
 
Join Date: Jul 2011
Location: Europe
Car: bmw
Posts: 27
Thanks: 0
Thanked 7 Times in 5 Posts
Default

You need to change VO/FA (vehicle order) you need to delete $205 option that is automatic gearbox.

You'll need NCS Expert and do next steps ( there may be some diferent way but i'll try it write down as i remeber):
1. open NCS expert
2. load expert mode
3. read out your vehicle press F1 - VIN/ZCS/FA
4. press F3 - ZCS/FA f.ECU
5. press back
6. choose process ECU
7. choose CAS
8. choose change FA/VO
9. delete option $205
10. go to process ECU
11. find CAS
12. change job to "FA/VO write"
13. process that job
14. change job again and select "sg code"
15. execute that job

do the same for LM or FRM module.

regards, m
Reply With Quote
The Following User Says Thank You to m3man For This Useful Post:
LOISICAR (07-10-2011)
  #3  
Old 07-10-2011, 02:27 PM
Junior Member
 
Join Date: Jul 2011
Location: ALGERIA
Car: E60
Posts: 16
Thanks: 4
Thanked 0 Times in 0 Posts
Default

thank you too much for help
Reply With Quote
  #4  
Old 07-10-2011, 02:29 PM
Junior Member
 
Join Date: Jul 2011
Location: ALGERIA
Car: E60
Posts: 16
Thanks: 4
Thanked 0 Times in 0 Posts
Default

i will test and report
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
E-Sys Coding & VCM User Manual v1.4 ac427 Instructions, user manuals 11 10-24-2018 08:05 AM
BMW Voice Control - User Manual ac427 Instructions, user manuals 1 10-15-2013 04:47 PM
BMW e46 Auto to Manual Transmission Swap mikerob97 BMW diagnostics and repair 6 04-02-2012 03:04 AM
NCS Expert Manual questions HELP Bmwnua313 BMW diagnostics and repair 1 12-31-2011 03:39 PM
Owner Manual Downloads Sleuth Instructions, user manuals 0 05-28-2011 12:58 PM


All times are GMT. The time now is 11:17 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.1
BMW forum: diagnostics, coding, programming.