BMW ICOM NEXT | BMW NBT EVO FSC Codes | BMW NBT & CIC FSC Codes | BMW Rheingold , ISTA/P, KSD, ETK remote installation | BMW STANDARD TOOLS remote installation | BMW ESYS remote installation
Go Back   BMW forum. Diagnostics, coding, programming, repair BMW vehicles. > BMWelcome > BMW coding and programming > BMW GT1, OPS/OPPS, INPA

Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 04-16-2012, 01:26 PM
Junior Member
 
Join Date: Apr 2012
Location: London
Car: E60 535d LCI
Posts: 7
Thanks: 0
Thanked 1 Time in 1 Post
Default Help re-programming SZL my E60 LCI

Hi guys, I have a 535D LCI E60 and so does a friend of mine, Mine is a 57 and his is an 08.

His BC Button hasnt worked since he bought the car so i thought we would swap some bits from one car to the other to find the fault.

Long story short, we swapped over steering control modules to check if it was anything to do with them, but his didnt work regardless of what we tried, when we reinstalled them back to the correct vehicles we both now have the same problem that wont clear!

Codes:
9501 Steering angle sensor calibration
94C1: Coding/data error

I have tried re calibrating steering angle sensors using my Launch X431 but comes up with nothing on the actual angle reading and nothing i have tried has worked.

I went into the programming menu and it comes up with Code index check error and wont let me code anything

A friend has bmw INPA, can we fix using this and does anybody know the procedure, the correct vin still comes up when you read the ECU identity.

Also could we have messed up the coding for the DSC?

Any input would be greatly apprieciated

Many thanks

Gary

Last edited by Garyk; 04-16-2012 at 06:26 PM.


Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Introduction to coding & programming Admin BMW coding and programming 108 09-28-2019 07:01 PM
KOMBI Programming lion_mercedes BMW ISIS, ICOM A+B+C, Esys 9 10-27-2012 07:32 PM
problem about programming DME via winkfp weiss BMW GT1, OPS/OPPS, INPA 5 02-20-2012 04:27 AM
Programming after replacing component moe325 BMW GT1, OPS/OPPS, INPA 0 01-30-2012 12:33 PM
Bmw 120d e87 - n47 - air bag mrs module - programming Scooter BMW GT1, OPS/OPPS, INPA 0 04-26-2011 12:55 PM


All times are GMT. The time now is 05:45 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.1
BMW forum: diagnostics, coding, programming.