BMW ICOM NEXT | BMW NBT EVO FSC Codes | BMW NBT & CIC FSC Codes | BMW Rheingold , ISTA/P, KSD, ETK remote installation | BMW STANDARD TOOLS remote installation | BMW ESYS remote installation
Go Back   BMW forum. Diagnostics, coding, programming, repair BMW vehicles. > BMWelcome > BMW coding and programming > BMW GT1, OPS/OPPS, INPA

Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 03-22-2015, 04:22 PM
Junior Member
 
Join Date: Mar 2015
Location: USA
Car: E90 M3
Posts: 3
Thanks: 0
Thanked 0 Times in 0 Posts
Talking INPA Error Help Please - Won't Read Engine Analog

I am having an issue that I would like some help on. I've tried several different installations and similar errors seem to occur.

Car - 2008 M3

Notes:

1. I can open NCSExpert and code without issue. I coded out a door chime to experiment.
2. I can open Tool32 and load modules without issue. I registered the battery since replacing a new one yesterday.

Here's the issue -

1. When I open INPA I get the two black circles. I connect to e90, then select Engine and then MSS60. I click on status and then click on analog. There are (5) I/O modules below. All of them refresh EXCEPT for I/O 1.

2. When I select I/O 1 I get errors and I have to click continue to get them to post up one by one.

The errors I'm getting throughout the process are either - ECU Subfunction Not Supported or EDIABAS Error 134: API-0014 depending on which part of the process I'm stepping through.

There also appears to be other things that may or may not work, but let's just start there.


Again, I've tried multiple installations and they all have similar errors with INPA.

Thanks.

Doug
Attached Images
File Type: jpg Error1.jpg (239.9 KB, 23 views)
File Type: jpg Error2.jpg (238.7 KB, 14 views)

Last edited by douglee25; 03-22-2015 at 05:18 PM.


Reply With Quote
  #2  
Old 03-23-2015, 12:42 PM
Junior Member
 
Join Date: Mar 2015
Location: USA
Car: E90 M3
Posts: 3
Thanks: 0
Thanked 0 Times in 0 Posts
Default

Anyone??
Reply With Quote
  #3  
Old 04-09-2015, 03:57 PM
Junior Member
 
Join Date: Mar 2015
Location: USA
Car: E90 M3
Posts: 3
Thanks: 0
Thanked 0 Times in 0 Posts
Default

Does anyone have an idea how to address?

Thanks.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
2004 E46 M3 Engine ECU with Error 81 chrisi1909 BMW diagnostics and repair 1 09-05-2013 01:51 AM
NCS-Reading VO(FA) and INPA-Engine(DME) read error tinkerman BMW coding and programming 3 04-11-2013 05:26 AM
R55: FRM, SPEG, ABG Read Error calforhelp BMW coding and programming 1 03-31-2013 03:02 AM
'91 E30 325i Error read (INPA) derFireBird BMW diagnostics and repair 0 08-27-2012 08:32 AM
Can't read FRM with INPA srohang1 BMW GT1, OPS/OPPS, INPA 3 02-19-2012 04:04 PM


All times are GMT. The time now is 01:17 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.1
BMW forum: diagnostics, coding, programming.