BMW ICOM NEXT | BMW NBT EVO FSC Codes | BMW NBT & CIC FSC Codes | BMW Rheingold , ISTA/P, KSD, ETK remote installation | BMW STANDARD TOOLS remote installation | BMW ESYS remote installation
Go Back   BMW forum. Diagnostics, coding, programming, repair BMW vehicles. > BMWelcome > BMW coding and programming > BMW GT1, OPS/OPPS, INPA

Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 05-31-2015, 04:42 PM
Junior Member
 
Join Date: May 2015
Location: Bulgaria
Car: BMW E39 530D
Posts: 2
Thanks: 0
Thanked 0 Times in 0 Posts
Default M57 don't start after unsuccessful ECU flash

Hi. I'm new in the forum, but I hope to find help here. So here is my problem:

The car is E39 530D 193hp.
I bought the car with changed transmission from auto to manual, but the software was not updated. I've decided that I can do it my self, read many guides and bought K-line cable. I've changed the VO to corresponding for manual tranny and updated the EWS and IKE, but when try to get the whole car coded I receive error, that it can't connect to ZH module. I've tried to remove it from the VO, but again same error. However P from the dashboard turned off and I decided, that it is OK now.
Then I wanted to update the ECU software to the latest one (13617789631) for manual transmission with WinKFP (comfort mode, KWP2000 don't appear in WinKFP), found some DATEN files, don't remember the version and tried to flash the ECU, but after quick reaching 100% (1-2 seconds) it failed and the car don't start any more. The temperature gauge goes to go the right, oil lamp don't flash at all, and on the board computer is written some problem with the injection. Also I cannot connect with INPA or ISTA.
I'm not sure what to do now and how to fix my car. Please give me some advice or if there are similar threads help me to find them.


Reply With Quote
  #2  
Old 05-31-2015, 06:24 PM
Member
 
Join Date: Aug 2011
Location: Russia
Car: BMW
Posts: 94
Thanks: 0
Thanked 20 Times in 19 Posts
Default

You need to reflash your ecu with OPPS or ICOM.
__________________
Remote BMW Coding & Programming. FSC codes. ISN Calculation. Chip-tuning, DPF, EGR off.
Reply With Quote
  #3  
Old 06-01-2015, 08:34 PM
Junior Member
 
Join Date: May 2015
Location: Bulgaria
Car: BMW E39 530D
Posts: 2
Thanks: 0
Thanked 0 Times in 0 Posts
Default

Is there any other thing I can do, because I don't have access to the listed software and hardware.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
BMW E39 won't start (EWS) killiki BMW coding and programming 5 08-10-2015 04:19 PM
Help LM E65 Bad flash beyondcr BMW coding and programming 0 01-24-2015 03:50 PM
Unsuccessful Coding with ISTA/P anton30 BMW GT1, OPS/OPPS, INPA 0 06-15-2014 01:35 PM
E46 DME flash. Codeman BMW coding and programming 0 05-10-2014 09:59 PM
Z3 no start ok2003us BMW diagnostics and repair 1 04-24-2012 07:27 PM


All times are GMT. The time now is 11:10 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.1
BMW forum: diagnostics, coding, programming.