BMW forum. Diagnostics, coding, programming, repair BMW vehicles.

BMW forum. Diagnostics, coding, programming, repair BMW vehicles. (http://bmwcoders.com/forum/)
-   BMW GT1, OPS/OPPS, INPA (http://bmwcoders.com/forum/bmw-gt1-ops-opps-inpa-24/)
-   -   Setting up inpa for ads (http://bmwcoders.com/forum/bmw-gt1-ops-opps-inpa-24/setting-up-inpa-ads-573/)

linux44 10-06-2011 11:35 PM

Setting up inpa for ads
 
Hello Guys,

I need to diagnose my ABS module on my e36 328i 1998 and I realised that I will need an ADS interface thus i bought it. The problem I am facing is whenever i start inpa it crashes because i changed the std:obd to std:ads in c:\EDIABAS\bin\EDIABAS and c:\EDIABAS\bin\obd

my question is, is that all i need to do to tell the software to run using ads ?

secondly, My laptop does not have a com port, so i have a pcmcia and usb to serial com port. after researching i realized that usb won't work with serial ads and pcmcia may work if a resource tab can be seen on the driver page.

I can not see the resource tab on my pcmcia and the windows recognised it as usb to serial although it is a pcmcia. so what pcmcia with what chipset should i buy to make it work with ads ?

thanks for all of ur helps

Evgeny 10-07-2011 07:06 AM

Quote:

Originally Posted by linux44 (Post 2097)
Hello Guys,

I need to diagnose my ABS module on my e36 328i 1998 and I realised that I will need an ADS interface thus i bought it. The problem I am facing is whenever i start inpa it crashes because i changed the std:obd to std:ads in c:\EDIABAS\bin\EDIABAS and c:\EDIABAS\bin\obd

my question is, is that all i need to do to tell the software to run using ads ?

secondly, My laptop does not have a com port, so i have a pcmcia and usb to serial com port. after researching i realized that usb won't work with serial ads and pcmcia may work if a resource tab can be seen on the driver page.

I can not see the resource tab on my pcmcia and the windows recognised it as usb to serial although it is a pcmcia. so what pcmcia with what chipset should i buy to make it work with ads ?

thanks for all of ur helps

Your mistake is that you set up std:ads. Where are no such interface in ediabas. Only ADS, just try to read documetation.;)
For ADS you need hardware COM-port, not emulator. Try to find it.

Werty 10-16-2011 02:38 PM

What PCMCIA adapter do you use?


All times are GMT. The time now is 03:47 AM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2020, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.1
BMW forum: diagnostics, coding, programming.