BMW ICOM NEXT | BMW NBT EVO FSC Codes | BMW NBT & CIC FSC Codes | BMW Rheingold , ISTA/P, KSD, ETK remote installation | BMW STANDARD TOOLS remote installation | BMW ESYS remote installation
Go Back   BMW forum. Diagnostics, coding, programming, repair BMW vehicles. > BMWelcome > BMW coding and programming > BMW GT1, OPS/OPPS, INPA

LinkBack Thread Tools Display Modes
Old 06-15-2014, 01:35 PM
Junior Member
Join Date: Jun 2014
Location: TRINIDAD
Car: BMW E60
Posts: 1
Thanks: 0
Thanked 0 Times in 0 Posts
Default Unsuccessful Coding with ISTA/P

Any ideas on the unsucessful coding of the SGM/ASCM and the SZL on an E60 520i from 2004. Installed new modules both of them. I can program both modules as infact I can all the other modules but the coding and initialisation comes up wrong all the time. Anyone with any idea what I am not doing right. I have done this on other cars without problems including another E60.

Reply With Quote

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
BMW ISTA/P documentation - coding / programming Admin BMW ISIS, ICOM A+B+C, Esys 25 03-06-2019 01:55 PM
Adding printing support to ISTA/P ISTA/D native install ejs BMW ISIS, ICOM A+B+C, Esys 10 11-20-2015 11:02 PM
First run of ISTA-P generates loads of coding -- why? elinachris BMW ISIS, ICOM A+B+C, Esys 5 08-24-2013 10:36 AM
ISTA/P coding DDE7 from auto to manual conversion 120dmsport BMW ISIS, ICOM A+B+C, Esys 2 02-08-2013 04:36 PM
BMW ISID 3.1 Native install on Lenovo ISTA-D 2.35 ISTA-P 2.48.2 Admin BMW ISIS, ICOM A+B+C, Esys 0 02-04-2013 11:30 PM

All times are GMT. The time now is 05:47 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.1
BMW forum: diagnostics, coding, programming.