BMW ICOM NEXT | BMW NBT EVO FSC Codes | BMW NBT & CIC FSC Codes | BMW Rheingold , ISTA/P, KSD, ETK remote installation | BMW STANDARD TOOLS remote installation | BMW ESYS remote installation
Go Back   BMW forum. Diagnostics, coding, programming, repair BMW vehicles. > BMWelcome > BMW coding and programming > BMW ISIS, ICOM A+B+C, Esys

Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 02-17-2015, 09:32 PM
Junior Member
 
Join Date: Apr 2014
Location: athens
Car: mini one r56
Posts: 5
Thanks: 0
Thanked 0 Times in 0 Posts
Default bmw rheingold troubleshooting

Hello!

I have installed Bmw rheingold to my computer and i am trying to do a diagnosis through ista - d. I have connected Icom A2 and managed to see the module as long as it's IP through IToolRadar. When i am at the step of connection the status of the header says firmware and i cannot connect with the vehicle. I thought that the firmware of icom would have to be upgraded so i managed to upgrade it with all the bellow versions:

System : 1.20.00, Application : 1.33.00
System : 1.22.00, Application : 1.36.01
System : 1.22.00, Application : 1.36.02

But non of these versions managed to solve my problem and change status to "free", nevertheless when i connect k+dcan obd cable and configure rheingold it works fine, but with the header no. What is the problem please ?
Attached Images
File Type: jpg 20150217_182149.jpg (797.8 KB, 20 views)


Reply With Quote
  #2  
Old 02-18-2015, 12:59 PM
Junior Member
 
Join Date: Apr 2014
Location: athens
Car: mini one r56
Posts: 5
Thanks: 0
Thanked 0 Times in 0 Posts
Default

Quote:
Originally Posted by mo328i View Post
Hello!

I have installed Bmw rheingold to my computer and i am trying to do a diagnosis through ista - d. I have connected Icom A2 and managed to see the module as long as it's IP through IToolRadar. When i am at the step of connection the status of the header says firmware and i cannot connect with the vehicle. I thought that the firmware of icom would have to be upgraded so i managed to upgrade it with all the bellow versions:

System : 1.20.00, Application : 1.33.00
System : 1.22.00, Application : 1.36.01
System : 1.22.00, Application : 1.36.02

But non of these versions managed to solve my problem and change status to "free", nevertheless when i connect k+dcan obd cable and configure rheingold it works fine, but with the header no. What is the problem please ?
Solved, the icom a2 module's firmware needed update , i suppose with a specific version.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
bmw rheingold knutsen BMW Programmers 0 01-30-2015 09:08 AM
need help on Rheingold! Wensiang BMW coding and programming 1 05-14-2014 05:29 PM
Thermostat troubleshooting Gwegz320 BMW GT1, OPS/OPPS, INPA 0 03-05-2014 11:14 AM
Rheingold 3.40 Guru BMW ISIS, ICOM A+B+C, Esys 32 02-17-2014 06:43 PM
BMW Rheingold Admin BMW ISIS, ICOM A+B+C, Esys 9 01-20-2014 11:08 PM


All times are GMT. The time now is 06:04 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.1
BMW forum: diagnostics, coding, programming.