BMW ICOM NEXT | BMW NBT EVO FSC Codes | BMW NBT & CIC FSC Codes | BMW Rheingold , ISTA/P, KSD, ETK remote installation | BMW STANDARD TOOLS remote installation | BMW ESYS remote installation
Go Back   BMW forum. Diagnostics, coding, programming, repair BMW vehicles. > BMWelcome > BMW coding and programming > BMW ISIS, ICOM A+B+C, Esys

Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 06-26-2012, 01:24 PM
Junior Member
 
Join Date: May 2012
Location: HK
Car: BMW
Posts: 2
Thanks: 0
Thanked 0 Times in 0 Posts
Default "Connection via VIN" is whited out

Hi,

I followed up the installation instruction to install E sys 3.18 and built my own cable. Connected to a F02 and loaded ZGW and got the IP and VIN correctly. Ran E Sys and press "Connection". However, the "Connection via VIN" is whited out. It is not a selectable option. Here I have a question, when you not hook with your car and run E sys, is your "Connection via VIN" whited out? Please help me to confirm your E sys.


Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
INPA connection problems Admin BMW GT1, OPS/OPPS, INPA 23 04-06-2016 06:50 PM
Change the "automatic headlights" on E39 (With sensor) Alpejohn BMW coding and programming 3 08-03-2012 03:42 PM
Very curious "SIM module" error on my e65 bmw Please read and help ! secagold BMW diagnostics and repair 0 05-27-2012 05:45 PM
E-SYS connection F02 bmwbenz BMW coding and programming 1 05-26-2012 05:22 PM
n00b area - i.e. "Getting Started" forum Joe Forum Suggestions 8 11-16-2011 04:17 PM


All times are GMT. The time now is 09:23 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.1
BMW forum: diagnostics, coding, programming.