BMW ICOM NEXT | BMW NBT EVO FSC Codes | BMW NBT & CIC FSC Codes | BMW Rheingold , ISTA/P, KSD, ETK remote installation | BMW STANDARD TOOLS remote installation | BMW ESYS remote installation
Go Back   BMW forum. Diagnostics, coding, programming, repair BMW vehicles. > BMWelcome > BMW coding and programming > BMW ISIS, ICOM A+B+C, Esys

Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 08-26-2017, 04:35 PM
Junior Member
 
Join Date: Aug 2017
Location: Uk
Posts: 2
Thanks: 0
Thanked 0 Times in 0 Posts
Default Genuine icom + most adapter with winkfp for E60 telematic flashing

Anyone know if you can flash most bus modules with winkfp?

I have a genuine icom A2 and B and dealer licence istad and p

But using istap on my pre lci E60 we programmed the whole car fine inc ccc.

We then added retro fit usb/audio which the car cannot have by bmw part options as it's not lci 2008.

Now when doing this retro fit it programmed/coded CAS, LM and TEL/ULF

Spoke to bmw technical and got the vehicle order xml to fix the VO and code the car, but TEL/ULF refuses to go backwards and wants the unit replaced probably for the mulf2high still.

Now I'm left with 3 options

1.Buy new telematics and even at staff rate it'll be 500ish.

2.Buy a 2nd hand telematics module and change the vin.

3. Use winkfp to brute force the flash on the telematics back to its original from factory state.

Attached is a photo of the telematics part number in the car



If anyone can help assist or have done this before please message or post, I can return the favour in very good ways ;)


Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Issue Flashing E53 X5 TCM with WinKFP sbrendtro BMW coding and programming 0 04-07-2017 07:00 PM
bmw icom + winkfp bmwe72 BMW ISIS, ICOM A+B+C, Esys 39 03-19-2017 07:44 PM
Searching for genuine iCom Stiffi66 BMW ISIS, ICOM A+B+C, Esys 11 05-30-2014 10:23 PM
Anyone here have an original ICOM? (ie genuine Actica, and not a copy) greglig BMW Programmers 4 05-30-2013 08:14 AM
ICOM works well with INPA + NCSEXPERT + WINKFP but miguex BMW ISIS, ICOM A+B+C, Esys 3 08-21-2012 07:50 PM


All times are GMT. The time now is 10:25 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2017, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.1
BMW forum: diagnostics, coding, programming.