BMW ICOM NEXT | BMW NBT EVO FSC Codes | BMW NBT & CIC FSC Codes | BMW Rheingold , ISTA/P, KSD, ETK remote installation | BMW STANDARD TOOLS remote installation | BMW ESYS remote installation
Go Back   BMW forum. Diagnostics, coding, programming, repair BMW vehicles. > BMWelcome > BMW coding and programming > BMW ISIS, ICOM A+B+C, Esys

Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 11-17-2011, 11:51 PM
Junior Member
 
Join Date: Jun 2011
Location: Seattle
Car: E65
Posts: 9
Thanks: 58
Thanked 179 Times in 5 Posts
Default ISIS WSM ICOM Visibility Problem

Hello,

I'm having some trouble getting my ISIS WSM (Workshop System Management) System Overview to recognize my ICOM device.

My ISIS/iBase is appropriately registered, and attempts to access(e.g, ping, http, etc.) the network-connected ICOM device all succeed both in and outside of the virtual machine in which ISIS is installed.

I've excluded all in-use IP addresses (set a not-allowed range/pool in the Workshop Network tab of WSM), but to no avail.

Beyond adding the ICOM as a new device in the WSM (via entering its unique MAC address, assigning it a color, etc.) are there any additional steps necessary to make my ICOM visible in the WSM System Overview?

Any help would be much appreciated!!!


Reply With Quote
  #2  
Old 11-22-2011, 04:35 PM
Junior Member
 
Join Date: Nov 2011
Location: italy
Car: bmw 330ci
Posts: 5
Thanks: 0
Thanked 1 Time in 1 Post
Default

From 2.9 isis/itools version , ICOM will not displayed into Itools.
try to open ista/d or ista/p and check if icom available.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Bmw ISIS, ICOM A+B+C Admin BMW ISIS, ICOM A+B+C, Esys 117 12-03-2015 02:19 AM
ISIS Installation problem tohmc BMW ISIS, ICOM A+B+C, Esys 16 03-15-2014 08:47 AM
Icom isid ethernet connections problem odofix BMW diagnostics and repair 9 10-18-2012 09:40 PM
NCS and INPA Problem. the_big_1 BMW GT1, OPS/OPPS, INPA 4 12-09-2011 03:23 AM
INPA and RLS problem kin BMW coding and programming 0 12-08-2011 09:31 AM


All times are GMT. The time now is 05:14 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.1
BMW forum: diagnostics, coding, programming.