BMW ICOM NEXT | BMW NBT EVO FSC Codes | BMW NBT & CIC FSC Codes | BMW Rheingold , ISTA/P, KSD, ETK remote installation | BMW STANDARD TOOLS remote installation | BMW ESYS remote installation
Go Back   BMW forum. Diagnostics, coding, programming, repair BMW vehicles. > BMWelcome > BMW coding and programming > BMW ISIS, ICOM A+B+C, Esys

Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 02-05-2018, 10:46 PM
Junior Member
 
Join Date: Mar 2013
Location: Australia
Car: BMW E90 330i
Posts: 5
Thanks: 0
Thanked 0 Times in 0 Posts
Default ISTA/P error - Switching programming mode defective

I have a 2005 E90 330i which I need to recode/program my DSC. ISTA/P wants to code the whole car, fine no problem lets do that. First module successfully programmed was the CAS, then the next module in the module tree is the JBE and this is where it bombs out, i get this error

Global.VehicleCommunication.CoA PI.2089 - (CoAPI) - Switching programming mode defective

I have good voltage, I am using schumacher battery charger (great unit), I know bad voltage causes lots of problems so thats not my problem.

I did run ISTA/P about 3-4 times over to see maybe it was just a glitch, but no same problem. Has anybody seen this before?

I have attached my ISTA/P final report for those interested to see.
Attached Files
File Type: pdf ISTAP_REPORT-NC46488.pdf (150.0 KB, 5 views)


Reply With Quote
  #2  
Old 02-14-2018, 09:54 PM
Member
 
Join Date: Jul 2017
Location: Darwin
Car: Mini Cooper S R53
Posts: 34
Thanks: 0
Thanked 3 Times in 3 Posts
Default

Hey, what interface are you using? K+DCan or icom?


Sent from my iPhone using Tapatalk
Reply With Quote
  #3  
Old 02-19-2018, 09:13 PM
Junior Member
 
Join Date: Mar 2013
Location: Australia
Car: BMW E90 330i
Posts: 5
Thanks: 0
Thanked 0 Times in 0 Posts
Default

I am using ICOM A
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Limp mode and DSC failure after adaptations reset in ISTA nclsamy BMW diagnostics and repair 0 07-24-2017 06:33 PM
ista/p expert mode single module programming not working svojoe BMW ISIS, ICOM A+B+C, Esys 1 02-09-2017 11:57 PM
ISTA P 3.59.0.600 Expert mode password Tuscani82 BMW coding and programming 1 12-29-2016 11:07 AM
ISTA/P Expert Mode How-to 505 BMW ISIS, ICOM A+B+C, Esys 0 01-21-2015 01:40 AM
ISSS (ISTA/P) Expert mode password ZanZomar BMW ISIS, ICOM A+B+C, Esys 2 12-11-2012 10:42 AM


All times are GMT. The time now is 11:46 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2018, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.1
BMW forum: diagnostics, coding, programming.