BMW ICOM NEXT | BMW NBT EVO FSC Codes | BMW NBT & CIC FSC Codes | BMW Rheingold , ISTA/P, KSD, ETK remote installation | BMW STANDARD TOOLS remote installation | BMW ESYS remote installation
Go Back   BMW forum. Diagnostics, coding, programming, repair BMW vehicles. > BMWelcome > BMW coding and programming > BMW ISIS, ICOM A+B+C, Esys

Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 02-15-2013, 01:03 AM
Junior Member
 
Join Date: Nov 2011
Location: Norway
Car: e91
Posts: 5
Thanks: 0
Thanked 0 Times in 0 Posts
Default program and code ekpm

Hello, is it possible to code a new ekpm3 with ista/p without going trough a big measureplan? The problem is the car had water ingress, which resultet in a broken bluetooth module, pdc, ahm and ekp module.
And for now I only got a new ekpm module, and it needs coding to let the car run...
But if I acknowledge the measureplan, it eventually fails cause the missing modules it tries to code/replace, and ends the measureplan, before it starts coding ekpm.

If it's completely impossible to choose only ekpm, is there anyway else I can do it?


Reply With Quote
  #2  
Old 02-15-2013, 07:00 AM
Junior Member
 
Join Date: Dec 2011
Location: romania
Car: 520
Posts: 24
Thanks: 5
Thanked 1 Time in 1 Post
Default

You can flash it with winkfp and then do coding to default with ncsexpert.
Reply With Quote
  #3  
Old 02-15-2013, 10:16 AM
Junior Member
 
Join Date: Nov 2011
Location: Norway
Car: e91
Posts: 5
Thanks: 0
Thanked 0 Times in 0 Posts
Default

Is this difficult?(ehh..how long is a rope) ;)
I've never used winkfp or ncsexpert(barely looked/tried ncsexpert), only used inpa and ista.
Another thing I was thinking, is it possible to remove bluetooth module, pdc, ahm from the cars equipment list. Then maybe I could program and code ekp(via ista/p)?

Last edited by panasync; 02-15-2013 at 10:25 AM.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
program services moonlite BMW coding and programming 2 08-28-2014 04:10 PM
Can i use e-sys to program my 2011 e71 chanfung BMW coding and programming 4 04-08-2013 04:00 PM
E85 EPS program/code error fbas BMW ISIS, ICOM A+B+C, Esys 0 02-07-2013 07:30 PM
Can i use e-sys to program my 2011 e71 chanfung BMW ISIS, ICOM A+B+C, Esys 1 12-21-2012 08:09 PM
BMW e90 program a szl hooter11 BMW coding and programming 7 07-19-2012 05:49 PM


All times are GMT. The time now is 11:37 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.1
BMW forum: diagnostics, coding, programming.