BMW ICOM NEXT | BMW NBT EVO FSC Codes | BMW NBT & CIC FSC Codes | BMW Rheingold , ISTA/P, KSD, ETK remote installation | BMW STANDARD TOOLS remote installation | BMW ESYS remote installation
Go Back   BMW forum. Diagnostics, coding, programming, repair BMW vehicles. > BMWelcome > BMW Programmers

LinkBack Thread Tools Display Modes
Old 07-15-2015, 09:13 PM
Junior Member
Join Date: Jul 2015
Location: Germany
Car: BMW E39 530D
Posts: 1
Thanks: 0
Thanked 0 Times in 0 Posts
Default E39 No Connection BMW SCANNER 1.3.6 & 1.4.0 -_-

Hi Guys :)

i have an BMW E39 530D Modell 1999 with 20Pin Board at the egine room

i have two Scanners first like 1.3.6 and twiste 1.4.0

and i also have two pc with windwos xp professional 32Bit

first i plug the 1.3.6 to the Mainboard without USB to RS232 Adapter

and open the software they write to me no connect to the unit
all setings look likes ok on this prozess the K line lamp was red and lights only for ms for green

i test this with other pc and have the same fail

so than i test the bmw scanner 1.4.0 with standard 20Pin to 16PIN OBD adapter on the two pcs and they says to me connection error to IKE and than to EWS

K+Dcan and the 20pin adapter runs with INPA perfectly i can open all units

on my diagnostic socket i gauged this


19 to 4 12,3V
19 to 7 11,7V
19 to 12 0,1V
19 to 20 9,3V
19 to 17 11,8V
19 to 14 12V
19 to 16 12,3V
19 to 13 0,03V

Pleas Help me

i must programm my LCM the KM and Vin from my Car

thank you

Reply With Quote

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
CIC ftp connection Hoborg BMW coding and programming 64 12-10-2016 06:47 PM
BMW F10 CIC FTP connection PaulGreatest BMW coding and programming 0 03-24-2015 11:31 AM
No connection setconstr BMW coding and programming 0 11-07-2014 03:51 AM
Auto connection with DIS rjc03001 BMW coding and programming 1 01-08-2013 11:47 PM
E-SYS connection F02 bmwbenz BMW coding and programming 1 05-26-2012 05:22 PM

All times are GMT. The time now is 12:01 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.1
BMW forum: diagnostics, coding, programming.