BMW ICOM NEXT | BMW NBT EVO FSC Codes | BMW NBT & CIC FSC Codes | BMW Rheingold , ISTA/P, KSD, ETK remote installation | BMW STANDARD TOOLS remote installation | BMW ESYS remote installation
Go Back   BMW forum. Diagnostics, coding, programming, repair BMW vehicles. > BMWelcome > BMW Programmers

LinkBack Thread Tools Display Modes
Old 03-14-2014, 03:19 PM
Junior Member
Join Date: Jan 2013
Location: Baltimore, USA
Car: BMW 850 CSI
Posts: 8
Thanks: 0
Thanked 1 Time in 1 Post
Default E89 dme/cas

I am replacing the DME (MSV80) in the E89 Z4, I got a used DME (also a MVS80 from another BMW) and I was able to code the VIN in this used DME, however the car does not start because It canít do the alignment or synchronizes with the existing CAS; is there any tool that can do the DME/CAS alignment so they both pair and the engine starts. Reason for replacing the original DME is because it has SA861 code on it, and no matter what I do I canít remove that code, so the OBD (on board diagnostic) system is not working, am I need that to be working for emissions; I upload the US software into the DME but apparently the DME does not have the drivers to send the signal to the instrument cluster whenever a fault is detected in the Power train.

Reply With Quote
Old 03-26-2014, 10:20 PM
Junior Member
Join Date: Feb 2014
Location: manchester
Car: 320 d
Posts: 13
Thanks: 0
Thanked 0 Times in 0 Posts

I COM will do this for you!
Go in DME adjustments and there you have it.
You will need a good lap top to run XP Virtual machine.
Reply With Quote

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

All times are GMT. The time now is 01:38 PM.

Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.1
BMW forum: diagnostics, coding, programming.