BMW ICOM NEXT | BMW NBT EVO FSC Codes | BMW NBT & CIC FSC Codes | BMW Rheingold , ISTA/P, KSD, ETK remote installation | BMW STANDARD TOOLS remote installation | BMW ESYS remote installation
Go Back   BMW forum. Diagnostics, coding, programming, repair BMW vehicles. > BMWelcome > BMW coding and programming > BMW Scanner (PASoft)

Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 11-09-2013, 11:12 AM
Junior Member
 
Join Date: Nov 2013
Location: Sweden
Car: E60 530i
Posts: 1
Thanks: 0
Thanked 0 Times in 0 Posts
Default How do i program and code with PA Soft 2.0.1?

i have Pa Soft 2.0.1 for my e60 but i can only read and remove error codes, i baught it to remove the seatbelt warning etc.
so my question is how do i use 2.0.1 to program my e60??


Reply With Quote
  #2  
Old 03-03-2014, 09:03 PM
Junior Member
 
Join Date: Jul 2013
Location: Oslo
Car: E82
Posts: 3
Thanks: 1
Thanked 1 Time in 1 Post
Default

Hi, dont have the 2.0.1, but under programing, see if you can find this code.
(Seat Belt Chime)
Modul: ABG,
SBR_FAHRER_1 (Disables seat belt chime for driver side)
SBR_BEIFAHRER_1 (Disables seat belt chime for passenger side)
Reply With Quote
The Following User Says Thank You to p11gt For This Useful Post:
rabihfiras (08-11-2014)
  #3  
Old 08-11-2014, 10:28 AM
Banned
 
Join Date: Aug 2014
Location: California
Car: X5
Posts: 34
Thanks: 1
Thanked 3 Times in 2 Posts
Default

The Enhanced Warning System (BeltAlert) can be enabled
or disabled by your authorized dealer or by
following these steps:
NOTE: The following steps must occur within the first
60 seconds of the ignition switch being turned to the ON
or START position. DaimlerChrysler does not recommend
deactivating the Enhanced Warning System
(BeltAlert).
1. With all doors closed and the ignition switch in any
position except On or Start, buckle the driverís seat belt.
2. Turn the ignition switch to the ON position and wait
for the Seat Belt Warning Light to turn off.
3. Within 60 seconds of turning the ignition switch to the
ON position, unbuckle and then re-buckle the driverís
seat belt at least three times within 10 seconds, ending
with the seat belt buckled.
NOTE: Watch for the Seat Belt Warning Light to turn on
while unbuckling and off while re-buckling the seat belt.
It may be necessary to retract the seat belt.
4. Turn the ignition switch to the LOCK position. A
single chime will sound to signify that you have successfully
completed the programming.
The Enhanced Warning System (BeltAlert) can be reactivated
by repeating this procedure.

find it from other forum, hope this is helpful for you
Reply With Quote
The Following User Says Thank You to Scot For This Useful Post:
rabihfiras (08-11-2014)
  #4  
Old 08-27-2014, 06:01 PM
Junior Member
 
Join Date: Aug 2014
Location: vic
Car: e46 330ci indervid
Posts: 1
Thanks: 0
Thanked 0 Times in 0 Posts
Default

thanks mate
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
BMW PA Soft 2.0.1 showing only CODE? maxspeed BMW Scanner (PASoft) 12 12-28-2015 03:30 AM
program and code ekpm panasync BMW ISIS, ICOM A+B+C, Esys 2 02-15-2013 10:16 AM
E85 EPS program/code error fbas BMW ISIS, ICOM A+B+C, Esys 0 02-07-2013 07:30 PM
PA Soft 1.36 oldmaddog BMW Scanner (PASoft) 1 10-10-2012 04:03 PM
P.A.Soft 1.3.6 ABS Clear? bobbi BMW Scanner (PASoft) 6 09-21-2011 05:40 AM


All times are GMT. The time now is 01:13 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.1
BMW forum: diagnostics, coding, programming.