BMW ICOM NEXT | BMW NBT EVO FSC Codes | BMW NBT & CIC FSC Codes | BMW Rheingold , ISTA/P, KSD, ETK remote installation | BMW STANDARD TOOLS remote installation | BMW ESYS remote installation
Go Back   BMW forum. Diagnostics, coding, programming, repair BMW vehicles. > BMWelcome > DIY guides

Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 05-17-2012, 06:46 PM
Junior Member
 
Join Date: Aug 2011
Location: Belgium
Car: F12 M6
Posts: 3
Thanks: 2
Thanked 0 Times in 0 Posts
Default 6 series E63 disable fog lights

Hi all.

I've installed a M6 package to a 630i E63 and I know it is possible with INPA NCS to add or remove functions but can anybody please help with a clear instruction how to remove/disable the fog lights.

This M package does not have the front fog lights. I have found a new light switch of a M6 so I dont have the switch also but the car gives an alarm that these lights are not installed.

Thanks a lot.


Reply With Quote
  #2  
Old 09-14-2012, 06:55 PM
Junior Member
 
Join Date: Jun 2011
Location: Ireland
Car: e63 630i SMG, e39, 525iA Sport, e36 320iC Sport Conv
Posts: 11
Thanks: 0
Thanked 2 Times in 2 Posts
Default

Why don't you just use NCS Expert to code off the bulb check for each of the fogs in the LMA module.
Read the LMA, look for the following lines & change from aktiv to nicht_aktiv :

KALTUEBERWACHUNG_NSW_R COLD MONITORING - FOG LIGHTS - FRONT RIGHT
aktiv

Change this to active: nicht_aktiv
-------------------------------------------------------------------------

KALTUEBERWACHUNG_NSW_L COLD MONITORING - FOG LIGHTS - FRONT LEFT
aktiv

Change this to active: nicht_aktiv
-------------------------------------------------------------------------

WARMUEBERWACHUNG_NSW_R HOT MONITORING - FOG LIGHTS - FRONT RIGHT
aktiv

Change this to active: nicht_aktiv
-------------------------------------------------------------------------
WARMUEBERWACHUNG_NSW_L HOT MONITORING - FOG LIGHTS - FRONT LEFT
aktiv

Change this to active: nicht_aktiv
-------------------------------------------------------------------------
Reply With Quote
  #3  
Old 09-17-2013, 11:29 AM
Junior Member
 
Join Date: Sep 2013
Location: England, U.K
Car: BMW 530D M Sport
Posts: 1
Thanks: 0
Thanked 0 Times in 0 Posts
Default

excellent, can you help me disable check control for cornering lights?
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
E39, 1997, 520i, LCM, K-BUS, Low instrument cluster, no lights and turn signal indica bemwa BMW diagnostics and repair 3 08-17-2014 08:20 AM
how to Disable Rear camera warning Never solely rely on camera by NCSEXPERT mbm1300 BMW GT1, OPS/OPPS, INPA 1 12-07-2012 07:58 AM
Bluetooth Pairing for BMW 3 Series with Navigation and all 5/6/M5/M6 Series vehicles Admin DIY guides 7 12-29-2011 03:36 AM
FL tail lights on pre 09/2000 E39s ahmovic DIY guides 0 09-24-2011 09:16 AM
1998 328i ews INPA disable linux44 BMW GT1, OPS/OPPS, INPA 1 07-10-2011 02:10 PM


All times are GMT. The time now is 07:30 AM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.1
BMW forum: diagnostics, coding, programming.