BMW ICOM NEXT | BMW NBT EVO FSC Codes | BMW NBT & CIC FSC Codes | BMW Rheingold , ISTA/P, KSD, ETK remote installation | BMW STANDARD TOOLS remote installation | BMW ESYS remote installation
Go Back   BMW forum. Diagnostics, coding, programming, repair BMW vehicles. > BMWelcome > Off-topic

Reply
 
LinkBack Thread Tools Display Modes
  #1  
Old 10-21-2015, 08:32 AM
Banned
 
Join Date: Mar 2015
Location: new york
Car: BMW
Posts: 8
Thanks: 0
Thanked 0 Times in 0 Posts
Default 1998 E36 M3 Convertible Install with Maxspeedingrods:

1. Support the rear of the car on jack stands at least 24 high.
2. Remove the rear wheels.
3. Remove the lower control arm bolts.
4. Remove exhaust and set aside.
5. Remove stabilizer sway bar and lower it out of the way leaving it connected to upper control arms.
6. Gently support final drive unit with floor jack.
7. Remove the 3 mounting bolts of the final drive.
8. Move the final drive up and back from the mounting points about .
9. Remove the upper 18mm bolt from both old control arms and save the bolt and captive nut for later reinstall.
10. Replace the old control arms and adjust each new arm to match the one it is replacing.
11. Install the upper end of both arms using the existing bolts and captive nuts. (Do not torque at this time!)
12. Reinstall all three final drive mounting bolts and then torque to specs.
13. Reattach stabilizer bar.
14. Attach new lower control arms at ball joints but do not tighten.
15. Install rear wheels.
20. Lower car and remove jack stands.
21. Shift transmission to neutral and manually move car about six feet in each direction to settle suspension.
22. Manually push car on ramps to raise rear of car.
23. Torque upper and lower control arm bolts to the specs in Bentley manual.
24. Raise car on jack stands AGAIN.
25. Reinstall exhaust per instructions in Bentley manual.
26. Take short test drive directly to alignment shop and align.


Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Review: Maxspeedingrods E36 Coilovers homauto Off-topic 0 09-16-2015 08:11 AM
Remove or modify convertible top-down speed limit supersleeper BMW coding and programming 1 06-12-2014 04:17 PM
E93 initialize convertible hood Aless91 BMW diagnostics and repair 0 01-19-2014 04:08 PM
1998 M3 sudden no start, help! vwnut8392 BMW diagnostics and repair 4 10-08-2013 01:29 AM
1998 328i ews INPA disable linux44 BMW GT1, OPS/OPPS, INPA 1 07-10-2011 02:10 PM


All times are GMT. The time now is 01:15 PM.


Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
Search Engine Optimization by vBSEO 3.6.1
BMW forum: diagnostics, coding, programming.